Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

replacement jointer cutterheads

Posts

replacement jointer cutterheads

#1

HapaJeff

replacement jointer cutterheads

HapaJeff

I am looking for a three-knife cutterhead for a recently acquired 8" Crescent jointer (1915 or so - pre-Crescent-Delta). The head that's in there now only has two cutters and uses pillow block bearings (not babbits).

I know there are many folks out there who would advocate a helical cutterhead, but I'm really only interested in one for straight knives.

Does anyone know of a supplier who may sell old parts, or one who would stock new ones?

Thanks,

Jeff

Re: replacement jointer cutterheads

#2

Re: replacement jointer cutterheads

FredD

Since your only interested in straight knives for a cutterhead , there are 4 knife heads on some machines.

I had a 1952 8 inch Boice-Crane with one, definitely a smoother cut then a 3 knife job and naturally harder to get all the edges the same height.

FredD

Re: replacement jointer cutterheads

#3

HapaJeff

Re: replacement jointer cutterheads

HapaJeff

I'd actually rather have a 4-knife head, so if anyone knows where I can get one of those, all the better.

Thanks!

Re: replacement jointer cutterheads

#4

Re: replacement jointer cutterheads

FredD

Try here, number of knives not apparent from ad.

http://www.terminus-stl.com/products/products.htm

FredD

Re: replacement jointer cutterheads

#5

Re: replacement jointer cutterheads

Jim Smith

Hello, I have a 8" cutterhead out of a grizzly 0490 that wasn't used but about thirty minutes before I changed it out for a byrd spiral head, have one unopened set of knives and the original set, will take one hundred dollars plus shipping from Eastern N.C. I think this is a four knife head but I will get pictures tomorrow if you are interested. Jim Smith

Re: replacement jointer cutterheads

#6

Bart Goldberg

Re: replacement jointer cutterheads

Bart Goldberg

I have an 8" cutter head from my Delta DJ-20 that you can purchase. I upgraded to a Byrd spiral about a year ago and the Delta OEM cutterhead is still sitting in the crate the Byrd came in. It is a 3 knife cutterhead. Will accept any reasonable offer.

Shipping from NJ.

Bart

Re: replacement jointer cutterheads

#7

HapaJeff

Jim and Bart, please contact me

HapaJeff

Jim Simth and Bart Goldberg, please contact me offline at hapajeff@yahoo.com. I'm interested in talking with you about your cutterheads.

thanks,

Jeff

Re: replacement jointer cutterheads

#8

Re: replacement jointer cutterheads

FredD

Clank, that was the sound of my faulty memory slipping back into drive .

I took delivery of a 8 inch DJ- X 8 inch jointer and I had the tool Dealer (Overland Tool) install a Shellix Helical head and I never thought about the one new one they took out.

Until now...................... . If you wish I will give them a ring and see if they would drop ship it to you if they still have it, they better , it is my property. Only cost to you may be the shipping or anybody else that needs one.

FredD