Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

resaw bandsaw

Posts

resaw bandsaw

#1

Bob

resaw bandsaw

bob

I am a handtool guy and dont normally come to this forum. I would like to resaw 1 by 8 or 2 by 8 material for hobby projects. There is a Walker Turner band saw on an Amish auction nearby . The auction is this Tues.I am wondering if I should bid on the saw.It looks like the classic W-T bandsaw (16"?)and this appears to only be set up for wood. The Amish removed the motor so it is a pulley driven machine. The bearings seemed tight and generally good condition . It has a narrow blade on the saw so I doubt it was used for resawing.

Would a saw of this type be adequate for resawing? I could put a 2 hp motor on it if necessary. My guess is I can get it for $200 to 300, but that is just a guess.

Assuming decent condition and original style guides (?), could a saw like this do the job?

Thanks,

Bob

Re: resaw bandsaw

#2

Re: resaw bandsaw

Bill White

You could resaw a Buick with a 2 hp motor. Too many variables to comment about the "value" but, if all is in order, you should have no probs at all.

Bill

Re: resaw bandsaw

#3

Ellis Walentine

I owned that saw

Ellis Walentine

... and lost it in a fire. I'd love to have it back. The wood version will resaw 11" high boards, and it is a wonderful resaw. I replaced the original motor with a 1 1/2hp Baldor for a couple hundred bucks and was very satisfied with the performance, though if you are willing to cut more slowly in tall material, you can get by with an even smaller motor. You'll have to figure out the pulley ratio that yields the SFPM you want. (I don't recall -- was it 2500fpm? -- no time to look it up).

Anyhow, if you can get it for that price, it's a killer deal, assuming it's in good working order. Go for it.

Ellis Walentine, Host

Re: resaw bandsaw

#5

Bob

Re: I owned that saw

bob

That is good news. Thanks to all for the comments. Now, I have to get to the auction on time.

Bob