Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Morris chair questions...

Posts

Morris chair questions...

#1

Morris chair questions...

Scott Burr in Ben Lomond CA

I'm planning on build a chair based on this design.

For those of you who have built on or use one

How often do you adjust the back angle of the chair or is it left in one position most of the time?

If it's left in one position for most of the time witch position is it in?

Thanks!

Re: Morris chair questions...

#2

no design

Jerry Gibbs

Your post does not have a design. My chair has 5 holes. Most of the time it is in the second from the front. I use the most upright to eat. I never use the back 3. Jerry

Re: Morris chair questions...

#3

Re: no design

Frank

Howdy

I made my chair about 12 years ago and it was made from about 4-5 different plans. The back we don't move but what I did do just a few weeks ago, I dropped the back of the seat about 3" more. It was just too flat. It isn't my chair, it is the wifes chair. After WHINE:30 I go off to another room. But back to the chair, that really realy help that chair. She said she would want to slide off the chair a little on the leather seat. I did have the back drop about maybe 2" but I guess that wasn't enough??? But she likes it now, so "what's name" name is happy now...

Frank

Re: Morris chair questions...

#4

Re: Morris chair questions...

Bruce, a MN Galoot

Don't know what design you're using, Scott, but the one I made (a FWW design) called for 5 holes. I've only used one. Were I going to make one again, I wouldn't settle on a back angle until I'd tried it in several positions. Then I'd drill the hole and make the stop. Truth is, I'm lazy, and changing positions takes more effort than I'm willing to put into it.

Re: Morris chair questions...

#5

Re: Morris chair questions...

Rick in Colgate, Wi

My Morris chair has 3 posistions and I use the first and third posistions equally. The chair also begs for an ottoman so I built that as well.

Re: Morris chair questions...

#6

ottoman

Jerry Gibbs

If the ottoman is of similiar design, it is a good place to start if you need practice. Less wood to screw up. Jerry

Re: Morris chair questions...

#7

Re: Morris chair questions...

Jim Hoeller

My wife and I share one; I keep the back upright when I'm in it and she lowers it one or two notches when she uses it.

Re: Morris chair questions...

#8

Thanks guy...

Scott Burr in Ben Lomond CA

For all the info. I don't have a design yet, hence the questions. The chair I'll be designing can't be as deep as a morris chair. That's why I was wondering about how most people use theirs. I'm planing on making it adjust linda like a lazy boy recliner that can go up against the wall and swing back by the seat moving forward.

Again, thanks for your help.

Re: Morris chair questions...

#9

Re: Thanks guy...

Bart Leetch

http://www.woodmagazine.com/woodworking-plans/furniture/mission/morris-chair/

They also have plans for the ottoman.