Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

New tablesaw motor

Posts

New tablesaw motor

#1

New tablesaw motor

Rob Hix

Hello all,

My Jet contractor saw motor decided to give up the ghost a week or so ago. The replacement motor from Jet is around $450.00. I did not pay much more than that for the saw originally. A friend of mine in the HVAC industry can get me a brand spanking new 1.5 HP motor for around $100.00. The only thing is it does not have the electric brake and will not stop as fast. That and I may have to build a mount for it.

Question is, is there any reason other than the quicker blade stop to get a motor with the brake on it? If not, I am thinking it is my best option right now.

Thanks in advance,

Rob Hix

Re: New tablesaw motor

#2

Re: New tablesaw motor

Bruce, a MN Galoot

A little over ten years ago I put a Baldor 1.5 hp motor (15 amps, a true 1.5 hp motor) on my Delta contractor saw. It has no brake or anything fancy like that, but the increase in power was sure nice. I suppose there are good reasons to have an automatic brake, but I've never needed it. I just step back for the few seconds it takes for the blade to spin down.

Re: New tablesaw motor

#3

Re: New table saw motor

Barry Irby

Rob, Literally about forty years ago I bought a Delta Rockwell Contractor saw that had a 1 1/2hp motor on it. Not terribly long after the warranty expired the motor expired and I replaced it with a Dayton 2hp motor. Not only does it not have a break, I did not know such things existed on this class of saws. The Dayton motor has done everything I have asked of it for about 38 years. So, I would not hesitate to replace the motor with one without a break. I am sure a Dayton motor would be be more than $100, but you might be able to get one that is closer to an exact replacement in size and layout and not have to modify or build a base.

Re: New tablesaw motor

#4

Re: New tablesaw motor

John Veerkamp

Get the frame number and you should be able to match it without needing to rube up one.

Re: New tablesaw motor

#5

Motors from Grizzly

Jon

I never had a motor brake on a table saw, but I do like it on my SCMS.

Grizzly sells quite a few motors. A TEFC 110/220V 3450 rpm sells for $215.00

If your buddy's $100 motor fits without a big mounting hassel, go for it.

Re: New tablesaw motor

#6

I have had several motors rebuilt,

Keith Newton----Little Rock, Arkansas

which can be a lot cheaper than a new motor. Do you know what failed? Something like a capacitor can be under $20.

Re: New tablesaw motor

#7

Re: New tablesaw motor

Yonak

When the motor went out on my Jet saw last summer I found out it had a non-standard frame and standard frames would have been difficult to modify. Having it rewound would have cost nearly as much as a new motor.

I ended up getting a replacement from Walter Meier in LaVergne, Tenn. The motor was pricy, but the shipping was reasonable for such a heavy item and it was fast. I ordered it Tuesday afternoon, got it Thursday and was back in operation before the end of the day Thursday.

Re: New tablesaw motor

#8

Re: I have had several motors rebuilt,

bob murphy

Hi,

Might be worth taking the motor to a rebuild shop and see what a rebuild would cost.

Bob