Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

OT: Titanium screw supplier?

Posts

OT: Titanium screw supplier?

#1

Jason Roehl in Lafayette, IN

OT: Titanium screw supplier?

Jason Roehl in Lafayette, IN

Okay, so I just upgraded my wheels. Well, the two-wheeled, human-powered set of wheels, anyway, and, as the title might imply, I chose a "lofty" material for the frame.

So a little bit of the OCD in me wants to use titanium fasteners when I attach accessories. Does anyone know of a supplier? I've searched McMaster-Carr, McFeely's and Fastenal, but none of them sell what I want.

Here are the specs:

M5 thread

10 or 12mm length (12mm preferred)

socket head (Allen/hex, can be tapered)

fully threaded

I'd like to get a package of maybe 25-50, but I don't want to be paying the online cycling store prices of $4-$15/pair. I'm sure there's a mark-up in there...even $1 per screw would probably be okay.

Thanks!

Jason

Re: OT: Titanium screw supplier?

#2

Jim in Burlington Ont.

Re: OT: Titanium screw supplier? *LINK*

Jim in River Oaks, Ont.

Hi Jason,

Here is a list of suppliers. We used Titanium fasters a lot in Aerospace, I can check with some of our buyers at work if that will help.

Take care,

Jim


Suppliers

Re: OT: Titanium screw supplier?

#4

Jason Roehl in Lafayette, IN

Re: Ha!  You think THAT'S high?

Jason Roehl in Lafayette, IN

Well, the "lofty" was more intended to be a reference to titanium's overwhelming use in the aerospace industry (probably more than anywhere else), though it was a tad pricey, too.

I suppose you could buy those screws, or you could buy about 10 CD players that would give you much better sound... ;) :D

I am going to have some fun with those screws, though--I'm going to post that link on a cycling forum where I hang out--it will drive the "weight weenies" nuts. These guys will spend $200 to drop 10g from their bike. (My old bike--a late '80s Schwinn, with all the accessories I put on, came in at over 37 lbs with 2 full water bottles--I dropped about 16 lbs. off that weight with the new bike, but I just saw a bike build that came in under 12 lbs.)

Jason

Re: OT: Titanium screw supplier?

#5

Jason Roehl in Lafayette, IN

Thanks...

Jason Roehl in Lafayette, IN

I'm hoping for some more replies, though. That link showed suppliers that look like custom wholesalers. They might be an option, but I would guess there's a large setup fee that would only be economical with a run of several thousand or more, not the few dozen I want to have on hand. I was hoping for some place from which I could order online with plastic. All these cycle shops have to be getting those screws from somewhere...

Jason

Re: OT: Titanium screw supplier?

#6

Re: OT: Titanium screw supplier?

Larry Clinton At Frankfort, (Central) Indiana

Hi Jason - you might try to call Fastenal in Frankfort - I know they did carry titanium - probably have to have some shipped in if not in stock. When I worked at Emerson in Frankfort, we did buy the titanium bolts in Lebanon - but I can't remember the supplier.

Fastenal Company

Street: 3032 West County Road O Ns

Frankfort, in 46041-

Phone: (765) 654-5330

Re: OT: Titanium screw supplier?

#7

It gets better *LINK*

Henry Higginbotham

I suppose you could buy those screws, or you could buy about 10 CD players that would give you much better sound... ;) :D

Man, you need a LOT of smileys and stuff after that howler!

Audiophiles (sometimes AKA audiophools) can hang right in there with your bike "weight weenies." Here's an AC power cord (for equipment with an IEC socket, rather than a hard-wired cord). You can easily find 1-meter cords that cost way more than this one, too. Don't ask me how it helps to have three feet of "good" wire on the end of 50 or 60 feet of borg Romex, but some folks swear it does. I can't afford to possess that sort of knowledge.


Really, really good power cord, I hope

Re: OT: Titanium screw supplier?

#8

Clint Searl

http://www.unitedtitanium.com

Clint Searl

Re: OT: Titanium screw supplier?

#9

Re: OT: Titanium screw supplier?

Chuck in Mtl.

what did you buy for a bike?

Re: OT: Titanium screw supplier?

#11

Just superglue another penny on the tone arm.

Gary Smyth

Re: OT: Titanium screw supplier?

#12

Can't.  I live in Alabama.  We use duck tape.

Henry Higginbotham

I think it's a state law. :D

Re: OT: Titanium screw supplier?

#13

craigd

Re: OT: Titanium screw supplier?

craigd

Also check aluminum - lighter and cheaper than Ti. Plenty strong for water bottle cages and the like (also available for rear d�railleur pivot bolts). I used them on my stem (road bike) for many years (not that I recommend that but they held and didn't rot).

Re: OT: Titanium screw supplier?

#14

Do NOT tape a duck on the tone arm

Bill Houghton, Sebastopol, CA

you won't be able to hear the music for the quacking.

Re: OT: Titanium screw supplier?

#15

   

John in NM

Re: OT: Titanium screw supplier?

#16

Not just audiophiles

John in NM

We have some MIT guys up here this week, and I was discussing technological "improvements" with one of them. His point was that in most of the High Def and blu ray improvements, most of us with older eyes won't distinguish the differences anyhow.

Which brought up the interesting philosophical point - We both agreed it was likely to be easier to invent some easy thing that no one really needs and put your effort into convincing the shopping public that they do need it, than it is to correctly identify an actual need and invent a product that will fill it. :D

Inventions that fill real needs may be technologically difficult if not impossible much of the time, but Homo Sapiens are just gullible enough to flock to useless crap with sufficiently slick marketing. This is probably why ad people historically make more $$$ than engineers :D