Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Router bearings source...

Posts

Router bearings source...

#1

Router bearings source...

Dave Winters

Ever forget where you got a part? I have a router bit set up with a bottom bearing with, believe it or not, a 1/2" I.D., 5/8" O.D bearing.

I got the bit from Eagle America, and thought I got the bearing from them as well, but they don't list it as a stock size.

So maybe I sourced it somewhere else. Must be my C.R.S. disease!!

Thanks in advance!

Dave

Re: Router bearings source...

#2

Jim in Burlington Ont.

Re: Router bearings source... *LINK*

Jim in River Oaks, Ont.

CMT?


Bearings

Re: Router bearings source...

#3

Thanks Jim...They Don't Have My Size...

Dave Winters

Re: Router bearings source...

#4

If These Guys Don't Have It *LINK*

Mark Mandell - Gone Round In Jersey

It Ain't Made.

You're describing a bearing that's a total of 1/16" for both the races and the bearings [1/2 id x 5/8 od]. That's a new one on me especially for a router bit application. Sounds more like a bushing than a roller bearing.

I have a 1/2 x 3/4 top-guide bearing for a 1/2" shank 3/4 straight pattern-cutting bit, but that's as close to your spec as I've seen. You sure about the OD?


NTN

Re: Router bearings source...

#5

You're sure about the size?

John in NM

That is one crazy oddball size! :D

How about some pictures of the bit?

Re: Router bearings source...

#6

Re: If These Guys Don't Have It

Dave Winters

I'll look again, you're right, that doesn't seem right...

Re: Router bearings source...

#7

My Bad!!!

Dave Winters

Sorry to waste everyone's time: it's 3/4" O.D.

Thanks for all the responses!

Dave

Re: Router bearings source...

#8

Go,

Mark Mandell - Gone Round In Jersey

Say 5 Hail Harrys, and rout more. :D :D