Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

old, new clock

Posts

old, new clock

#1

old, new clock

Joe Mohnike

I have been given an old, new clock. A friend of mine got the clock fron a friend of his, who purchased only the movement, and never made or purchsed the case. After 8-9 years of collecting dust, while still in the box, he gave it to my friend. He kept it for another 8-9 years and let it collect dust, still in the box. He gave it to me. I have made the case for it, everything fits, but it does not keep running (all the parts are there). I need to find a trouble shooting sheet, or plans for the movement. It is an Emporer mod 451-050H. I am thinking that after so many years in the box, it may just need oiling, would 3in1 be ok. Almost forgot this is a tall clock. Any help/advise will be appreciated.

Thanks

Joe M.

Re: old, new clock

#2

Moses Yoder

Re: old, new clock

Moses Yoder

Have you checked to see if the movement is totally level in both planes? Plus, we need to see pics. No pic = no clock.

Re: old, new clock

#3

Sounds familiar

paul in AZ

I have two tall clocks that don't run.

One a miniature grandfather ~3 feet tall that was a traveling salesman's demo from the early 20th C. and another a grandmother I made 30 [?] years ago.

The old one never ran right and two clock repair men couldn't get it running. OK, its mantel place decor.

The other ran for a year or two until moved to clean the floor and hasn't run since.

Pendulum driven clocks are extremely sensitive to vertical positioning. One idea is to get a pair of bubble level indicators and screw them at right angles to the top. Then adjust the legs to see if you can find a vertical that allows the clock to run. Now adjust the bubbles to 'zero' so you have a chance of finding the sweet spot if the clock is ever moved.

Sounds easier than it is. I gave up. Good luck.

I think there are specialty clock oils if that is a concern.

Re: old, new clock

#4

Re: old, new clock

Lee Schierer McKean, PA

I wouldn't use 3 in 1 oil, but it does sound like it needs lube. I use a very fine synthetic oil on my grandfather clock. I don't recall the name. You don't need a lot of oil, just a touch on each bearing on both sides of the works.

Lee

Re: old, new clock

#5

Re: old, new clock

Joseph Mulherin

also...maybe a little graphite blown in... like into stuck door locks.

Re: old, new clock

#6

Re: old, new clock *LINK*

Howard Norman

3in1 is not a clock oil. There are several online clock part companies. One that i have used in the past is listed below.


Time Savers

Re: old, new clock

#7

Re: old, new clock *LINK*

del schisler

I didn't read any other post's yet. The clock has to be level and the movement has to be on BEAT. What that mean's that the pendelum has to have the same sound on both swing's of the pendelum. the way to do that is i don't know what kind of movement but their may be a clutch on the verge which move's over the excapement wheel whis is the wheele that has lot's of teeth on it . Their are a few way's clock's do this. I have been around clock's for 50 or more yr's . Have fix lot's of clocks in that time. go to this link and read about it. I am sure their will be info that will show you how. good luck Movement may need oil but should run once on beat. Than look up clock oil on line or just go to a clock shop and get oil . Just put a drop on each little circle that hold's the geear's and a drop on the gear that has all the teeth that is the excapement wheele good luck


http://www.google.com/#hl=en&sugexp=ldymls&xhr=t&q=setting+a+clock+on+beat&cp=23&pf=p&sclient=psy&aq=f&aqi=&aql=&oq=setting+a+clock+on+beat&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=11afd23a2315408b

Re: old, new clock

#8

Re: old, new clock

Dave Nichols

If the clock is on carpet it can be difficult to get it level. I had this problem with my Grandmother clock. I filled the base with bricks to help compress the carpet under the leveling feet. It has been running without problems for over 8 years.

Re: old, new clock

#9

Re: old, new clock

Neal in San Jose

I bought a old, old clock. As a precaution, and because it was on the way home from the anteeq dealer, I stopped at a repair shop that is reputed to be the best on the West Coast for a check-up. It turns out the repairman had seen my clock about 4 years earlier; he pointed out a sticker he had put inside the movement.

His comment to me was that 3 in 1 oil and similar products kept him supplied with a steady stream of customers. Most general purpose oil gets gummy, and loves to capture dust and dirt which will slow down or even stop the movement, which provides him with a lot of cleaning business. Track down some oil made for clocks - the companies that currently make movements might be a good place to start looking or check with a local repair person and see what they use.

Oh, yea, my clock. Turns out it is a "prayer clock"! It chimes 5 minutes before the hour then chimes again on the hour. You are supposed to pray for that 5 minutes every hour. There is no way to turn it off. I think I let it run for about 4 hours before it started to drive me nuts, so I can't help much on your problem of getting yours to run reliably.

Re: old, new clock

#10

Re: old, new clock

Joe Mohnike

Thanks all.

I went home took a good look, was level. Looked at movement, saw a black piece of plastic under the movement, I guess it was somekind of shipping protection. When I removed it the ckock kept running. I then adjusted the tone bars, as they were interfering with the swing of the pendilum. It ran all night and was with in 1 min. of the clock I set it too.

Thanks again.

Joe M.

Re: old, new clock

#11

Re: old, new clock

pete labelle

Hey Joe -

Level or not, listen to the beat of the clock. It should be an even tick-tock-tick-tock. If it is a tick tock........tick tock........tick tock, the verge is out of adjustment. Some clocks have an "auto-beat" feature where, after the clock case is made stationary, swing the pendulum as far as it can swing, then let is settle out. This his how to adjust it. Older movements needed link bent a bit. This incostent beat is the biggest reason many pendulum clocks don't perform for first time users. Almost got an older grandfather clock for this reason till I talked to the owner on this subject.

Clock oil only on a clock. Period. Oil only the pivots and never the gears. Bout every 2 years. A half drop only.

As you regulate the time, it will take a few months to tweak it in. Adjust the screw no more than one revolution at a time. Eventually you will be doing fractional turns. Turning the bob screw to raise (speed up the time) the bob can be done directly. If you need to slow it down, there is backlash between the bob and screw. Gently turn the screw to turn pull the bob down. You will feel some easy movement of the screw, then a bit more pressure when it starts to move the bob. Once you have moved the bob, turn the screw the other way so it now suppports the bob, else the bob can drift down farther.

Did you know, that 150 years ago, when big clocks were shipped to people, they often included a cheap sun dial to set it? After all, it was only when Western Union came along that they were able to syncronize clocks between cities & states !

Pete