Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

What wood for table legs?

Posts

What wood for table legs?

#1

What wood for table legs?

OneDayJD

I'm working on a kitchen island/butcher block table. Originally I was using newel posts for the legs. But I've decided to scrap that idea because of my lack of tools to get them to do what I want. Therefore, I am just going with square posts, it will make my life so much easier. Not to mention, I've been working on this project for about 8 or 9 months, and if I switch to square posts, I can finish it in a day or two. Long story. Anyway, the whole frame of the table and bottom shelf, etc., was made with cedar. However, I am having trouble finding 4x4 cedar posts and the ones I do find are ridiculously expensive. Is there a substitute? I don't want to use treated lumber posts, because the color and grain of the wood is so different it would look like crap. I will be finishing the table with either teak oil, or some sort of darkening stain/oil. Any suggestions on something I could get at Lowe's or my local lumber dealer? Thanks so much. Ready to get this thing finished!

Re: What wood for table legs?

#2

Jim in Burlington Ont.

Re: What wood for table legs?

Jim in River Oaks, Ont.

Yellow Pine maybe? I was thinking hemlock, but that might not be common where you are.

Just a thought,

Jim

Re: What wood for table legs?

#3

Re: What wood for table legs?

Thomas Skaggs, Foothills of Mount Level

If cedar is available and more affordable in standard thicknesses then perhaps you could rip some 1" thick cedar and glue up 4" blanks for your legs?

Tom

Re: What wood for table legs?

#4

Re: What wood for table legs?

OneDayJD

Skaggs, that's an excellent idea! I had not even thought about that. If I did that, should I cut the boards to length and then glue them? Or should I just take the boards, glue them together, and then cut them to length? Also, can I do this with standard wood glue and clamps? How long should I let it set before I get to cutting? Great idea! Thanks.

Re: What wood for table legs?

#5

Re: What wood for table legs?

Thomas Skaggs, Foothills of Mount Level

If you have a miter saw I would make the blanks about an inch longer than you need. Then when after the blanks come out of glue-up take them to the miter saw and cut a little off both ends to the finish length you need. That way you have clean square ends.

Tom

Re: What wood for table legs?

#6

Re: What wood for table legs?

Lee Schierer McKean, PA

Or take four boards and bevel the edges lengthwise and glue them up to form a square tube. It will look solid, but will weigh about half as much.

Lee

Re: What wood for table legs?

#7

Jim in Burlington Ont.

I Totally Agree

Jim in River Oaks, Ont.

That's exactly what I would do Lee,

I use that process often on furniture pieces, works well.


Take care,

Jim

Re: What wood for table legs?

#8

Clint Searl

Re: What wood for table legs?

Clint Searl

I just got back from Lowes, where I saw a rack of cedar 4x4's that looked great. It only costs a little more to simplify the project. Go for it.

Clint

Re: What wood for table legs?

#9

Re: What wood for table legs?

mdclor

I also agree with Lee. In addition to less weight and materials you have the benefit of face grain showing on all four sides. I think that is better looking.