We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
well I had to plumb a deep sink into my garage this weekend and got it all done with only three trips to the store to get couplings to connect the black pipe to the white pipe etc. Anyway I had a roll of solder I have had for years and just about finished it off so I figured I would get a roll to replace it. I walked away with out it at $25 a pound for a roll of solder with out any lead in it. What is making it so expensive? Does anybody know of a cheaper place to get it?
There are lots of forumlations for lead free solder but I found this:
"Lead-free solders in commercial use may contain tin, copper, silver, bismuth, indium, zinc, antimony, and traces of other metals"
I would imagine all of these are more expensive than lead and then there is the general rule of everything goes up in price. I know how you feel, I had the same case of sticker shock when I bought some after many years.
I prefer to solder, rather than caulk, flashings, and the price of bar solder has me gasping. I watch for it at garage sales. A week or so ago, I bought a box of soldering coppers that I didn't need just to get the 1-1/2 sticks of bar solder in the bottom of the box.
As JL pointed out. Plumbing solder is mostly tin, running right around $13/lb, no surprise it's twice that once it gets made into solder, packaged, and shipped to your local hardware store.
I suspect too that if you were buying 100 lbs. of it the pricing might look different. Hardware store sizes always have lots of margin built in because of all the extra handling and packaging.
You can thank your friendly Environmental Protection Agency for this little inconvenience. I needed some for an auto application, good luck finding real lead. All the suppliers said EPA cause. Can't they just leave us alone?????
Can't wait until we have to use Tempra paint for cars.
Of our childrens' brains has been a truly positive effort. Yes, silver (at $35/oz) is more expensive than lead as a commodity, the the long-term cost is way less.
Cops in my area are getting grief about lead pollution in the water table from their firing range. NJ DEP is rumored to be considering requiring bullet traps on all police ranges to control the lead.
I replaced a couple lengths to and from the water heater awhile ago. The price of pipe and fittings had me bummed untill I reached for a new roll of solder. WOW ! The next time I saw my plumber buddy I was whining about it and he felt my pain. Didn't have any suggestions but offered sympathy.
How do you figure the rise in the price of lead-free solder is the fault of the EPA? If it's because they require the use of lead-free solder in plumbing, more power to them. A lifetime of drinking lead-laced water can destroy you nervous system.
In my state, Oregon, the mixture of " lead tire weights" is good for making bullets. My friends that still make their own, buy shot at the local stores and melt that. They say that the weights will not hold the shape of the mold and is not balanced properly. Dave
Actually sounds like the mold was cold, or contaminated.
Wheel weights are just about the perfect alloy for smokeless powders, especially if you consider the convenience factor. Some of the purists prefer lead-tin (wheel weights are generally lead-antimony), but I've yet to see any conclusive evidence to suggest there's much difference.
Blackpowder shooters typically use straight lead I understand, or a much softer alloy than the smokeless people like. Don't really know why, having never done any blackpowder shooting.
not to mention lead laced pottery, dishes, crystal stemware and so on.
Dave, now that the plumbing for the water supply is lead free, the water quality has become a issue, the only way I drink city tap water is in ice tea or coffee.
Our two wells are free of pollution and the Chlorine used to treat it.
The last roll I bought had me reeling. But consider, that if you are using that roll for plumbing, a full roll would probably do a house or two, so how bad is that in the real world?
But then, I consider myself an environmentalist, however, I wonder how much lead from a sweated joint can make it downstream into our drinking water.
I have inspected my sweat joints inside and out plenty of times, and can't see much showing on the inside of the pipe, once the capillary pulls it in, it doesn't show much tendency to flood out into the inside of the pipe.
There are so many other sources of metal consumption sources, that it's not funny.
I grew up fishing the same waters where we have a camp now. The creek it is on, is listed as one containing a higher than normal concentration of mercury, along with a warning to expectant mothers and children to avoid the top of the food chain fish. Of course that includes Crappy, Bass, and Catfish, which in the South,,,,,,,,,, well, I don't need to go there.
Even worse, the bend where we have our camp, and dock, I've been tempted to name Cypress Trout Landing, for all the nice Bowfin that I catch, while trying to catch all of the above. Each of them contains enough mercury to make a silent light switch, so needless to say, I make a lot of coons and hogs happy when I am down there fishing.
The reason I shared that story,,,,,,,,,,,, I guess is to explain why I'm the way I am. That is my story, and I'm sticking with it. ha, K