Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Grizzly Jointer Delivery Questions

Posts

Grizzly Jointer Delivery Questions

#1

Jim Rahbe, Bedford Texas

Grizzly Jointer Delivery Questions

Jim Rahbe, Bedford Texas

I should say up front I have yet to talk with Grizzly, but thought I�d be prepared ahead of time.

I plan to buy one of their 8� jointers and I am not sure how the delivery process works. I assume it does not just show up at your door, on the back of an 18-wheeler, unannounced. Does it get shipped to a local freight terminal who then contacts you about how and when it gets delivered? Obviously my house does not have a loading dock, so how do you ensure the freight truck has a lift gate? It might make sense to pick it up at the freight terminal.. Is this something you need to tell Grizzly up front as the delivery address?

If anyone has been through this process and has any tips for making it easier, I�d appreciate hearing them.

Thanks, Jim R.

Re: Grizzly Jointer Delivery Questions

#2

JL

Re: Grizzly Jointer Delivery Questions

JL

Usually you specify lift gate delivery. It may cost you a bit more.

You also give your contact information - especially for a residential delivery.

I have (when I lived in the big city) told them that I would pick up at the terminal. I can't do that anymore as I don't live near any terminal.

You tell the people at Grizzly what you would like - and you confirm it with the freight company when you get your "tracking" numbers.

Re: Grizzly Jointer Delivery Questions

#3

Re: Grizzly Jointer Delivery Questions

Jerry Gibbs

I have arranged for delivery to a small business with a forklift. I then took the unit home in pieces. Long time ago a semi pulled up in front of my house.I had ordered motor freight collect. The delivery cost as much as the 4x8 ply I had ordered. You are smart to learn beforehand. I have found the folks at Grizz to be most helpful with everything. Jerry.

Re: Grizzly Jointer Delivery Questions

#4

Re: Grizzly Jointer Delivery Questions

Dave Nichols

I've had several large machines delivered to a friend's body shop. He has a large roll-back truck which has a bed height even with the floor of the delivery truck. They would move the machine to his truck and then leave. I would then back up my old truck to the rear of his, he would tilt the bed to the level of my truck, slide it on and off we'd go. If you know someone who owns a garage or gas station with that type of truck it worked very well for me.

Re: Grizzly Jointer Delivery Questions

#5

Re: Grizzly Jointer Delivery Questions

Stuart Johnson

You specify lift gate / home delivery when you make your purchase. The freight company will call a day or two ahead to schedule the actual delivery. I have not had any problems with Saturday delivery when I needed it but that will depend on the freight company. The drivers have all been willing to roll the machines into the garage with the pallet jack but my last delivery involved rolling an 850 lb. lathe across uneven ground and up a short hill to the shop. That driver did earn a nice tip.

Re: Grizzly Jointer Delivery Questions

#6

Re: Grizzly Jointer Delivery Questions *LINK*

mdclor

Jim,

On the page of the machine you have chosen, there is a link to its manual. In the manual you will be able to find the Machine Data Sheet. It lists the weight and dimensions of the boxes you will receive. Below is a link to the sheet for the planer I bought. I was able to slide the boxes off the semi down onto my pick up's bed. Then from the pick up to the shop floor.

More difficult (since gravity will be working against you for this step) is the ability to lift the planer's beds onto the base unit. That will require 2 people strong enough to lift 200+ pounds each to about waist height. I used an engine hoist for that; you might be able to borrow one.

HTH,

Merle


G0490X

Re: Grizzly Jointer Delivery Questions

#7

Re: Grizzly Jointer Delivery Questions

FredD

Consider buying a Delta DJ 20 X from a tool dealer that will deliver and install for no additional charge, mine does.

They also were great at solving a problem with the one I bought the first time. I doubt Grizz would ever go to the lengths they and Delta did .

Regardless of the brand , do yourself a favor and get a Byrd helical head with it.

FredD

Re: Grizzly Jointer Delivery Questions

#8

Re: Grizzly Jointer Delivery Questions

Jesse Cloud

If you have the capability to pick it up at the terminal, that will usually be cheaper. However, some terminals only have semi-truck height docks.

If you specify lift gate, the driver will almost certainly slide it into your garage for you.

Re: Grizzly Jointer Delivery Questions

#9

Jim Rahbe, Bedford Texas

Thanks guys.. Great Feedback

Jim Rahbe, Bedford Texas