Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Calling Fred Davis

Posts

Calling Fred Davis

#1

Dale Lenz

Calling Fred Davis

Dale Lenz

Purchase some of that SW wood filler you posted about a few months ago. So what do you use to get the stuff into solution. It's caked up against the side of the gallon can like black gumbo mud!

Re: Calling Fred Davis

#2

Dale Lenz

OK Calling FredD

Dale Lenz

Re: Calling Fred Davis

#3

Re: Calling Fred Davis

FredD

You must have a really old can Dale. it can be pretty stiff , so I use a paint stirrer made for stirring five gallon paint cans and drywall compound and chuck it in a 1/2" drill motor .

Works really well .

If the filler looks to dry , cut it with a little Mineral spirits and some linseed oil.

Try power blending first .

You should get a consistency of mashed Potatoes or heavy Cream before you apply it.

FredD

Re: Calling Fred Davis

#4

Dale Lenz

Re: Calling Fred Davis

Dale Lenz

Got on of those 1 gallon stirrer thingys & did hook up to my 1/2" hand drill. Put all the "mud" into solution, took 20-30 minutes. The consistancy is no where near mashed tators. Might need to leave the can open for a few days(?). Think the date of mfg. was like 2009(?). Will try in the next few weeks, will let you know how it works. Thanks for answering my ?

Re: Calling Fred Davis

#5

Re: Calling Fred Davis

FredD

Dale , when I said Mashed Potatoes, the kind my wife makes in a hurry sometimes from dried stock is closer, maybe not the old fashion stuff with chunks in it. ;-))

Also the consistency of the heavy cream we got from a Jersey cow is ideal.

The payoff will come when you have a truly flat surface without any canyons in it.

A tip if you haven't done it before is to make sure you have it all scraped and wiped off before it dries , it will load sand paper , so that's not a option.

When the filler becomes hazy looking , scrape across grain with a straight edge, then get on it with Burlap or if you can still get some , we were taught in the shop class to use Excelsior.

Haven't seen any in years.

FredD

Re: Calling Fred Davis

#6

Dale Lenz

Re: Calling Fred Davis

Dale Lenz

Thanks, Fred...I'm almost through with my second qt. of the brand Jeff's website sells, something like 30 bucks to my door, SW stuff was $60 something for a gallon. The brand on Jeff's site begins with a B, I read it is being taken off the market.

I use an old credit card to spread and remove the filler material. Also use burlap to rub across grain.