Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Hinge Question

Posts

Hinge Question

#1

Hinge Question

Ken Krawford

I'm making a piece of furniture like the one shown. It has a false drawer that folds down. The "drawer" has a 1/8" reveal all around.

Are the hinges in the picture (that you can barely see) just plain old mortice hinges or are they something special?

If you have a suggestion for the type of hinge this application needs, I'm all ears.

Thanks.


img

Re: Hinge Question

#2

Re: Hinge Question

Thomas Norton

You could check out a"Butler Table" hinge.

Re: Hinge Question

#3

Re: Hinge Question

Dave Bair, Eaton Rapids, MI

They may be a "Butler's Tray" type hinge that holds the hinge in a folded position (i.e., closed) until you pull it open. If not, the "drawer front" would tend to flop down on it's own.

Re: Hinge Question

#4

Re: Hinge Question

Phil Joines

That design is what I'd call a barrister case. Try a search with the name a see what others are doing. Also, there are plans for them on the web you could check out.

Re: Hinge Question

#5

Agree

Dan Donaldson

My computer desk has that for both the keyboard and the mouse. It uses the butler tray hinges. They have stops built in so you would not need the braces on the ends as shown in your picture. Mine do not have any and they have lasted many years so far.

Re: Hinge Question

#6

Moses Yoder

Re: Hinge Question

Moses Yoder

A barrister case hinges up then slides in, which seems to me like a completely different application.