Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Table Saw Guidelines

Posts

Table Saw Guidelines

#1

Table Saw Guidelines

Ed Freestone

I'm shopping for a replacement for my Craftsman contractor saw and I like the Jet ProShop. But I'm curious about the rules on guard systems. I thought all saws now had to incorporate riving knives rather than the old style splitters. But Jet says the ProShop has the splitter style guard and no plans to switch to a riving knife.

Have I misunderstood the design rule? Is the lack of the riving knife a deal-breaker? FWIW I currently use a MicroJig splitter instead of the set-up that came with the saw.

Thanks for your input.

Ed Freestone

Silver Spring, MD

Re: Table Saw Guidelines

#2

Re: Table Saw Guidelines

Howard Acheson

Riving knives are required by UL to get the UL approval. They are only required on newly designed saws. The do not need to be retro-fitting to existing designs.

Re: Table Saw Guidelines

#3

Re: Table Saw Guidelines

Dave Paine

As another reply stated, the rules for riving knives are for new designs.

I recently upgraded to a newly designed saw which has a riving knife.

The previous saw had the splitter, which like you I replaced with the Micro Jig.

If the blade is raised to full height the Micro Jig is almost as effective.

The riving knife has the same distance from the blade at all elevations, and all blade angles.

In the old saw, I had to replace my insert when using the blade at an angle.

I like the riving knife on the new saw. Hard to say if I would make this a required feature for a new saw purchase. It was definately on my "nice to have" list of features.

I would check the design of any riving knife to see if its elevation can be changed. Mince can be lowered to be in line with the blade for through cuts. A very handy feature.