Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

House Painting Questions

Posts

House Painting Questions

#1

House Painting Questions

Barry Irby

Been working on the house I bought at foreclosure for my son. It has plywood siding like T1-11, textured fir but without grooves. There are batons on it so that it looks like board and batten siding. Some of the siding has weathered and the surface has checks or hundreds of fine cracks. I tried painting it today while making some repairs. The paint my son had was the Paint with primer built in from Home Depot. Behr Brand. The paint was fairly thick. I tried scrubbing it into the cracks. I tried slaughtering it on and brushing it in. It was a lot of work.

Most of the house is in better condition and this may only represent 100 to 200 SF.

The question is: What is the best approach? Should I thin the paint? Should I buy thinner primer? Or maybe thicker paint and not try to scrub it in and let it bridge the cracks. How about a roller? Sprayer?

Re: House Painting Questions

#2

JL

Caulk

JL

Our church has similar siding with battens. The pros who are painting it as part of the remodel are using "white lightening" caulk 3006. They put it on and wipe it off with a damp rag. All of the cracks are filled (they even do the corners where the batten touches the siding). The painted surface looks literally brand new.

Re: House Painting Questions

#3

Re: Caulk

Barry Irby

JL, Thanks. I would not have thought of caulk for this application. (I was planing to caulk the battens to the walls and caulk everything else, but had not thought of the cracks.)

Do you have any idea exactly what white lightening is? Are you saying they basically smear it into the surface with the rag?

In my case the cracks are very numerous and are maybe a hundredth of an inch. You couldn't get a sheet of paper in them.

Re: House Painting Questions

#4

Re: Caulk, White Lightning 3006  *LINK*

Bob Entwisle in NJ


http://www.wlcaulk.com/products/acrylic_latex_caulks_and_sealants/3006_all_purpose_adhesive_caulk/index.html

Re: House Painting Questions

#5

Re: House Painting Questions

FredD

The cracks in the Doug Fir T 1-11 are typical for that wood in Veneer form and is cause by the pressure bar being set to tight at the Mill.

If you buy a quality primer and top coat paint like Porters you would not see the cracks any longer.

The Primer is thick and bright white and has more opaqueness then any other I have used.

Antique White over that for a top coat should last you the rest of your years.

I have T 1-11 scored four inches O.C. on every wood sided building at our place and the Porter Primer and the Porter top coat are thirteen years old with out any degrading that one can see.

FredD

Re: House Painting Questions

#6

JL

Re: Caulk

JL

Wipe with a caulking corner for the battens, wipe in with a damp rag for the "flats". They went through a bit on the wall that they were fixing as part of the remodel. I guess maybe 5-6 tubes for several hundred sq. ft. But they were also using it for other work - so I'm sure they bought a case.

I supposed you could use DAP or another too. White Lightening is a reasonable brand and available by the case.

Re: House Painting Questions

#7

Well, Paint did not work....

Barry Irby

the area I painted looked good when I left. I had spent a lot of time scrubbing paint into the surface and brushing it out. Today when I returned the painted area looked about as cracked as the surrounding area I had not touched. clearly paint will not be able to fill and bridge the cracks. I am amazed. These cracks are about 1/100" and I thought the paint would do a lot more than it did.

I will have to try the caulking.

Re: House Painting Questions

#8

Re: Well, Paint did not work....

FredD

Doesn't sound like you tried Porter Paint's Primer, there is a world of difference between it and big box store products including Behr.

I also think that while smearing caulk on the panels may fill the cracks , it also will create smooth areas in a textured surface which is more unsightly them hair line cracks in my opinon.

FredD