Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Russian Olive

Posts

Russian Olive

#1

Russian Olive

Bob Strand

Gentlemen: As stated, I'm new to this site and with that said I put forth my question about Russian Olive assuming "everybody" knew I work exclusively on the lathe. My problem is in smoothing out turned pieces on the lathe. I do apologize to you guys who have responded without my specifying I was on the lathe. Thank you. I'll now go to the right place.

Bob

Re: Russian Olive

#2

Re: Russian Olive

Jim Dillon

Bob,

No problem at all, and I'm sure you will get some helpful advice from the folks on the WC turning forum. Be sure to come back and visit!

Jim

Re: Russian Olive

#3

Ellis Walentine

Re: Russian Olive

Ellis Walentine

Smoothing can take many forms depending on the wood and how rough the work is as it comes off your lathe tools. As Jim suggested, you will find more detailed turning information on the turning forum, which you can access from our home page or from the drop-down menu at the upper left of this page. (Mouse over "Messageboards" and select "Turning.

Be sure to tell us some details of what you have tried and what sorts of trouble you're having.

Welcome to WoodCentral.

Ellis Walentine, Host

Re: Russian Olive

#4

Re: Russian Olive

Bob Strand

Ellis: Thanks for the understanding nature. I'ver turned a good deal of Russian Olive and many time with the same results, don't get a good finish surface. This current piece is about 12"x12"x8" with a section on dark branch and a crack down the other side that is a bowl about 10"x4". . I like the look of the natural flaws so these couldn't be looked at as mistakes. At any rate I'm aware that these flaws will cause a tool to skip and perhaps that a major part of my problem but even with that said the grain of the wood doesn't seem to sand down evenly. Maybe old paper, maybe soft pad, maybe poor turning. I do power sand with 2" discs and also a 5" RO sander. I just have fits getting the tool marks sanded out.

Bob

Re: Russian Olive

#5

Russian Olive Stinks!

Alan

I live in Helena and we also have plenty of Russian Olive. I sawed one into planks a few years ago and it was the worst smelling wood I've ever worked. Nice graing pattern though. I haven't made anything with it yet, so it's good to know it doesn't like being sanded. Have you tried a handplane on it?