Panic bars
Doug Ridley
Church has asked me to install a panic bar on a door. Anyone done this and how hard is it?
Knowledge You Can Build On — Est. 1998
Panic bars
Doug Ridley
Church has asked me to install a panic bar on a door. Anyone done this and how hard is it?
Re: Panic bars
Mark Nowicki
I have, DOREX brand, the #8000 model.
If you can measure, drill and tap, and operate a screwdriver, it is a simple task.
Mark
Re: Panic bars
Doug Ridley
"Bout what I figured but didn't want to get it over my head. Thanks
Re: Panic bars
Mark Nowicki
You didn't ask but I feel I should tell you anyway. If you have a choice do not install this type: 
It very quckly becomes a storage space for brooms, umbrellas, walking canes or a convienent attachment point for bicycles, scooters. winter tires, etc. The culprits will always swear it is only for a "few minutes".
I would only install this type: 
Mark
Re: Panic bars
Ron Jones
Mark is right! Pay a little extra if needed upfront. It will be money well spent down the road.
Talk to a locksmith first!
Jason Roehl in Lafayette, IN
Find out what they sell and service. It could save you some money in the long run. Our church has 5 crash bars: 2 double doors and one single, and we're constantly fighting the stupid things because they're approaching 15 years old. We can't afford to replace them because anything we buy wouldn't work with the outside trim/mechanism, and the holes likely wouldn't line up, meaning patches on the metal doors, or new doors for even more money. Then, to top it off, the particular type of crash bar we have is not one the locksmith would sell or recommend (he could order it), because he thinks they're low quality. Their price? $975 EACH, so it doesn't matter that the locksmith wouldn't sell them to us. We could get some that are higher quality for less than half that, but then we're back to the compatibility issue...
Jason
Re: Talk to a locksmith first!
Doug Ridley
This is beginning to sound like a major issue. I have to do a lot of checking to find out exactly what they want and whether or not I can handle it. Beginning to think I need to check with the FDept. as they were the ones who mandated it. I haven't even looked at the door yet. The church just asked if I could install it.
Thanks for the comments.
Doug
Re: Talk to a locksmith first!
Ryan Hartje
It shouldn't be that big of a deal. Don't go for the cheapest hardware and be precise when installing. I spec'd Corwin Russwin ED8000 Series Pushpad Exit Devices on a small church project and ended up installing them. They went in fairly easy once we figured out how to read the instructions. Let me know where you are at and I should be able to find a distributor to go through. There are a lot of them willing to help out and knock their profit margin down.
Don't let me scare you off...
Jason Roehl in Lafayette, IN
I just wanted to let you know of my experiences with them, and that there are definitely models of crash bars ("exit devices") sold as commercial-duty that are simply expensive, but not reliable. Installation is generally pretty simple, and if you can precisely follow the instructions, you're golden. It's just the internal mechanisms that are not all created equal. That's why I suggested talking with an experienced locksmith first--find out what he recommends and will service if it goes south a few years down the road.
Jason
Re: Talk to a locksmith first!
Doug Ridley
Problem solved! Persuaded them to have a pro to install it. "Bout the easiest job I've ever had.