Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Bow front progress

Posts

Bow front progress

#1

Bow front progress

Bill Tindall


Finally got all the drawers done including a redo of #9 which somehow came out exactly 1" too deep on the first try. #9 has an English style "slip" to provide more bearing surface for this large drawer. I like to keep the sides 1/2" or less as I think it looks better and makes for a lighter drawer.

The drawers in rows 4&5 remain to be cock beaded. One can see the relief for the bead as an 1/8" gap around these drawers. Cock beading the bow front is especially time consuming for there is much hand fitting of the parts. There is a staggering amount of labor in these 9 drawers.

I still need to make and fit some drawer bottoms as well as the back and fit the skirt. Then on to finishing which will be burnt umber stain, and a top coat to be decided. I was pleased with the warmth of the varnish I put on the last chest of drawers and that may be the fate of this one.

Re: Bow front progress

#2

Going to be a great piece, Bill

John Pappas

Re: Bow front progress

#3

Re: Bow front progress

George Colonel's Workshop-Havertown PA

Happy Sunday Bill,

That is inspirational. It reflects exacting workmanship. Those drawerfronts are like pistons and cylindars within the cabinet frame. To me, that is real craftsmanship.

George

Re: Bow front progress

#4

Re: Bow front progress

Jennifer Indy.USA

Bill, this looks like an amazing piece. I'm looking forward to seeing it complete. It's going to be beautiful.

Jen

Re: Bow front progress

#5

Re: Bow front progress

Barry Irby

Bill, I am impressed all the way around. Wish i thought I could tackle such a piece.

A couple of questions.

When you say and inch too deep did you mean top to bottom as in the drawer was nine inches deep in stead of eight or did you mean font to back? (If it was front to back the easy fix would be to cut the sides off with a chainsaw and duck tape the back back on.)

Did you make the piece clamped across the bottom or buy it? Not sure where you are going with that and will wait for the photos.

Re: Bow front progress

#6

Looking good Bill!

John in NM

That's going to be a fantastic piece, good work!

Re: Bow front progress

#7

Wow!

Tony - Memphis

Really looking Nice. Thanks for sharing this project.

Tony

Re: Bow front progress

#8

Re: Bow front progress

Bill Tindall

The skirt was carved by Mary May.

Indeed I did chain saw off the back and re-duct-tailed the joints but my duct tape didn't hold. Which involved "pins first" to resaw the joint. Now I am sure that tails first is the only way to do dovetails!

Re: Bow front progress

#9

Who, may I ask....

Barry Irby

is Mary May? And what relationship, If any, does she suffer to you?

She also does really nice work. Nice contribution.

Does she work for mere mortals?

Re: Bow front progress

#10

Looking Good Bill !

Don Orr