Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

One more Jig question

Posts

One more Jig question

#1

One more Jig question

Greg Muller

When useing one of the router mortise and tenon jigs what type of bit should I use?

Re: One more Jig question

#2

Re: One more Jig question

Jim Dillon

Greg,

I've had excellent luck with spiral bits. Most of my spiral bits are upward spiral as they will clean out a deep mortise better than a downward spiral. But a downward spiral will leave a cleaner edge around the mortise. Your call. For shallow mortises, say for hinges, where you may be working with thinner material and the mortise won't be covered up, a downward spiral is better IMHO. Most of my spiral bits are from Whitesides and they have worked well. Hope this helps.

Jim

Re: One more Jig question

#3

spiral bits

del schisler

Re: One more Jig question

#4

Thank you All   

Greg Muller