The Zen of the sprung joint
Clint Searl
Like the BBE, or maybe in conjunction with the BBE, a sprung joint is supposed to prevent some calamity when boards are joined together. In the olden days it was a gotta-do before hide gluing a layup. There are still adherents to the practice. I think it had something to do with the joints at either end of the glued layup possibly pulling apart because the end grain would dry and shrink faster than the interior of the boards, making the glue fail. But that can't be right because a poster on the BBE thread asserted that hide glue from the local abattoir wouldn't have failed.
Anyway, let's see if I have the drill correct. After selecting all the boards for a table top, which have been S4S jointed and planed so that they're all the same thickness and the joints are all a perfect match, and are all at 6-8% moisture, I'm supposed to then hand plane the interior edge(s) of each board so that every joint will be subtly gapped toward the center. Then I can do the glueup and pull everything together with massive clamping, or is it cramping, pressure.
I hope someone can explain why I would want to do that when I've never (intentionally) done it before and have never had a problem with a layup coming apart.
Next time we'll explore the Zen of the dovetail joint.
Clint 




