Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

COunter Sink

Posts

COunter Sink

#1

COunter Sink

Doug Reynolds in Seattle

I need to counter sink some #4 flat head screws but all my counter sinks are way too big. Any ideas?

Re: COunter Sink

#2

Drill Bit ???     Re: COunter Sink

del schisler

Re: COunter Sink

#3

Re: COunter Sink

Dave Paine

As another post suggested, a drill bit of relevant size may work. For this small diameter, consider holding hand holding - between two fingers and lightly rotate.

I did this recently for a 7/16 in hole which needed a small counter and I wanted to avoid going too deep with the 3/4in bit I needed for the counter.

Re: COunter Sink

#4

Re: COunter Sink

Phil Joines

Hang on to a chuck from an old drill to use as a handle for this kind of stuff.

Re: COunter Sink

#5

Re: COunter Sink

DizD

I have a countersink/deburring tool set from Harbor Freight and I have used the small one to countersink holes in small brass hinges. Search for item # 66996 on HF website.