Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Router - Follow Up

Posts

Router - Follow Up

#1

Router - Follow Up

David C. Lykins - Dallas GA

A week or so ago I was looking to purchase a new router for my router table as my RE185 Ryobi started to die. I had a LOT of great suggestions, however someone mentioned that HD had the PC 892 on sale for $99. Well after driving around for 4 hours I went back to the first HD I stopped at as they were the only HD that had a router left that had both the 1/4" and 1/2" collets. There was no box, wrench or manual, however they dropped the price down to $79. So I HAD to get it.

The next morning I got up to mount my new router in my router table. Fortunately my Rousseau Router Table Insert fit the PC perfectly.....YEA!, I didn't have to buy another $45 insert. So I got everything set up and have used it quite a bit in the last couple of days. WOW, this router is awesome, very very quiet compaired to my Ryobi, and plenty of power. It's SOOOO much easier to adjust the height and get to the locking mechanisim for the shaft. Since I didn't have a wrench, I took one of my Ryobi wrenches and widen the throat on the grinder and it works perfect.

Thanks for the reccomendation, I'll get tons of use out of this router.

Re: Router - Follow Up

#2

Re: Router - Follow Up

Barry Irby

Congrats on the setup. I saw the thread and checked out the local HD. They had only the one on display and it had no collets. Tried to talk them out of it at a discount, but they wouldn't do it. They sent me to another store about ten miles away that had two. I was patiently waiting behind a lady buying a router bit for her husband. The clerk was totally out of it and would have sold her anything just to send her packing. I stuck my nose into her dilemma and helped her find the bit he wanted. While helping her, I grabbed one of the 892 routers and mentioned it was deeply discounted. She bought one for her husband. That was the last one they had. Hope he liked it. Now he can sue bits with a half inch shank also.

Now I may go back to the local HD and see if I can talk them out of the display model. Cheap After all, I can put the "other" collet in it form the one I bought and I have the wrench. Can't have too many routers. (WWND?)