Some neat work *LINK*
Clint Searl
Tadao Arimoto
Knowledge You Can Build On — Est. 1998
Some neat work *LINK*
Clint Searl
Tadao Arimoto
Bad Link
Mark Mandell - Gone Round In Jersey
Clint, you forgot to take out the first "http" in the link box. 
Fixed link here... *LINK*
Jason Roehl in Lafayette, IN
http://tadaoarimoto.com/index.php
Re: Some neat work
Tom Pilsbury (Chicago)
His work is beautiful and inspirational. Thanks for the link Clint.
I want to know how....
Barry Irby
he makes those scalloped surfaces. I am assuming a shallow gouge, very sharp. I really like some of this.
Re: Some neat work
Dan Donaldson
>Fixed. You did not get all of the http:// ;-)
Should be
Mark Mandell - Gone Round In Jersey
with a honed/polished bent spoon gouge by hand (no mallet), so that the final surface is actually the chisel-polish. Obviously a somewhat tedious surface to produce with tool control absolutely required. In the right light it will tend to "liquefy" the surface. Hard to control to avoid cutting unconscious patterns. I carved the oceans into an 7'+ globe, and after it was stained blue and the sun hit the surface, from 30' away you'd have sworn the surface was actually moving water.
Whoa! Whole new sets of skills to learn!
Barry Irby
I would have to learn the sharpening and polishing and the carving. Some things to look forward to.
Where did you get a 7' globe? Who in the world turned that? (Get it? "in the world"
)
We Made It
Mark Mandell - Gone Round In Jersey
As part of a community-built playground, I designed the globe to use the cut-offs and scrap from all the other elements in the playground. Pieces were used as "bricks" that were glued and screwed together by a 3-person team, who got dubbed the "God Squad". Then is was up to me. The playground was actually built in 5 days, but the carving took more like 2 weeks. When someone remarked on how long it was taking me since "God did it in only 6 days," I replied "Well, he had a bigger hammer." When I finished, they gave me a bigger hammer as in the attached.
