Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Shipping rates

Posts

Shipping rates

#1

Shipping rates

Chuck Lenz

Well I can't begin to tell you how disapointed that I am in the shipping rates that I've found. First of all I'll tell you that I'm still beating the crap out of myself trying to get the table saw dust hoods going, today may have been the final straw on building them. I had a guy wanting me to build a size that I've never built before, so there was extra time in figureing it out. I get the thing built and find out that standard shipping on average from 3 of the major shippers from ND to Ma is a whoping $65. The box would be aproximately 24" X 24" X 16, but the hood itself only weighs about 5 lbs. I think that it's outrageous and really wonder how some online retailers can do bussiness. I just bought and recieved a benchtop sheet metal shear that weighed around 65 lbs, was in a fairly large box, and got it for less then $100 with free shipping. Call me dumb, but I just don't get it.

Re: Shipping rates

#2

Moses Yoder

Re:  Shipping rates

Moses Yoder

You could always deliver it yourself and save the cost of paying someone else to do it for you. Is the $65 price from UPS?

Re: Shipping rates

#3

Re:  Shipping rates

Paul Cates - Henderson, KY

DId you check USPS Parcel Post? I entered your dimensions with a weight of 10 # from 58005 to 02134 (just guessing at ND and MA zips), and the price was $20.16, but you'd have to make a trip to the post office.

Re: Shipping rates

#4

Re:  Shipping rates

Barry Irby

I ship smaller but heavier boxes for VA to Michigan frequently and much cheaper than you mentioned. (Four 10x12x11 33lb boxes for about $90. Since they sell for about $1100 plus shipping, it seems OK) I stopped in the Fed Ex store and asked about it. They seem to think its the size of your box that is killing you. I thought 24" was a breaking point for them , but the clerk was not aware or any magic numbers or breaking points. Its as much about cubic inches as anything. They have to ship all that air and it takes up space.

They also said that some of the big shippers get "crazy discounts". 75% or more off what you and I can get. I have an account and that helps a little but not THAT much.

Can you make your DC products so that they break down and can go into much smaller boxes? It would help a lot. Shipping to a residence also adds to the cost.

Re: Shipping rates

#5

Re:  Shipping rates

Chuck Lenz

The $65 shipping quote was from UPS, the US Postal Service, and Pak Mail. Me deliver it personally from ND to MA ? your kidding right ? Or just being sarcastic ?

Re: Shipping rates

#6

Re:  Shipping rates

Chuck Lenz

I did go to the United States Postal Service website and got an estimate there. I wasn't able to put in an exact box size. I did get a little better quote of $56, or $46 if I ordered the label online, but I refuse to put any of this on our Credit Card, so it's still arond $60 to me. They did have another quote for about $25 dollars, but that service wasn't available for this package for some strange reason. I don't know why the $25 quote was even there. As far as breaking the dust hood down to fit a smaller box, I still wouldn't be loseing that much space, the box would still have to be around 24" X 24 ", only the height would change to about 6" less.

Re: Shipping rates

#7

Re:  Shipping rates

FredD

If we as a nation had kept Railway Express , you wouldn't be having the problem with light weight carriers.

FredD

Re: Shipping rates

#8

Dale Lenz

Dimensional weight...

Dale Lenz

is what you are getting hit with, Chuck. I just plugged your new box size: 24x24xx6 @ 6# from Okla. to Penn. Parcel post was $11.45. Dimensional weight is another way for the USPO to get into your pocket more. I think(?) it works something like, your package takes "X" amount of space, if it's light in weight, they, the USPS thinks they are getting screwed because that same size package of something else "could" weight more and they get more, their new marketing way? Screwed-up yes, but I pay it and go on. I always check shipping cost, pad a little(inflate weight by 1 lb. or so) to be safe and add to my finial itemized cost to my customer.

My motto is to learn the rules and go with it. I get bit occasional just like the other guy does, learn and go!

Re: Shipping rates

#9

Re: Dimensional weight...

Chuck Lenz

Dale, the smallest I could make the box would be 24" X 24" X 12". I doubt that it would make that much of a difference from what I was quoted earlier. There are other costs also, as in going to get a box and packing materials that I would need. But I know what your saying. The problem is that it's a really tough sell to someone when the shipping makes the item so costly that the consumer won't pay it. You've got to also remember that this is a one off custom made item. I'm going to do an experiment and see what a floor sweep made of sheet metal would cost to have shipped if I purchased one from lets say Oneida. I seriously doubt that standard shipping will be anywhere near $65. Not that it matters I guess.

Re: Shipping rates

#10

Dale Lenz

I know some folks in business...

Dale Lenz

eat some shipping fees, including packing peanuts, boxes etc, and call it the "cost of doing business", they do every well from what I can tell.

I try not to eat into my profits, myself. Years ago, I'd go to a Mail Mart and get an estimate to ship and charge the customers that. I even did some dumpster-diving to get boxes, finally, thought my time was worth something and starting purchasing cardboard boxes, packing peanut, bubble wrap and tape. Came up with a ball park shipping material cost and jack the price of product that amount. One thing I don't do is charge anything for packing my product up and taking to the PO, I should but don't.

As I've told my boys and other young folks if they want to succeed at something...My reply..."How Bad Do You Want It". That saying/attitude got me though college!

Chuck, I've seen your sheet metal work, it's looks great, I'd buy from you, if I needed something. You have a marketable product! You need to figure out howto sale it. If you have the desire, You will find a way!

Re: Shipping rates

#11

Moses Yoder

Re:  Shipping rates

Moses Yoder

I actually responded before I noticed who posted the question. I'm not trying to give you a hard time; I was just trying to put the $65 in perspective of what it would cost for gas to drive from North Dakota to Maine. You can go on Mapquest and get an estimate for the gas. But delivering it yourself is an actual option as I mentioned perhaps with some sarcasm.

Re: Shipping rates

#12

check with the bus line???

del schisler

Re: Shipping rates

#13

Re: I know some folks in business...

Chuck Lenz

Dale I apreciate your comment and bit the bullet after recieveing an e:mail this morning from the guy. I gave him a price on the hood, shipping, and insurance on the shipping. After it's all said and done I won't be makeing much, but I won't have a custom sized hood just laying around here either, plus hopefully he will be happy with the hood and how it works. Chalk it up as another learning experience.

Re: Shipping rates

#14

Re: Interesting idea Del, thanks

Chuck Lenz

Re: Shipping rates

#15

Re: Dimensional weight...

AZ in Colorado Springs

An exaggerated example would be to compare the volume of one ton of steel and one ton of feather pillows. If the shipping company charged simply by the pound without considering the volume of the freight, they'd get screwed on some shipments.

Re: Shipping rates

#16

Re: Dimensional weight...

Gerry In North Surrey

When I was in the LTL (Less Than Truckload) freight business we applied the "Cube Rule" where shipments were assumed to weigh 15 lbs per cubic foot. The 15 comes from dividing the cubic capacity of a trailer by the weight capacity. We often scaled shipments firstly to weed out the outright liars and to secondly measured questionable sized shipments and charged accordingly if the shipment was found to be 'fluffy'. If and when a freight charge seems high, just stop and think about how much room that shipment takes up and how many people are involved in picking up, crossdocking, loading, offloading, crossdocking again, loading it into a delivery vehicle, billing personell, etc etc.

Gerry, who ain't doin' the trucking thing anymore. There ain't no money in it.