Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Prestain

Posts

Prestain

#1

Prestain

Greg Muller

I am finishing a slab of Black Oak that is about 200 yrs old. I have sanded it and am about to spray a water based poly on it. I will not be staining leaveing it natural under the poly. Should I use a prestain or a conditioner and if so which one. I have some minwax prestain but have only used this on pine.


Re: Prestain

#2

Re: Prestain

Nat Robison

I'm no finishing expert but if you're not staining and you're spraying an absolutely clear topcoat, what would be the purpose of a prestain? I think they're typically only for use with oil-based stains, at least that's what the can I recently used said.

Re: Prestain

#3

Re: Prestain

David Yoho

Greg, a prestain or conditioner is not necessary in this case. They are generally used to inhibit stains or dye from darkening end grain and help prevent blotching on the surface. Since you are only applying a clear coating, a conditioner is not needed.

Re: Prestain

#4

Re: Prestain

Greg Muller

Thank you David.

Re: Prestain

#5

Re: Prestain

FredD

A piece of wood that looks like that would benefit from a application MinWax Wood Hardener available in Hardware and Paint stores .

I looks like water , has the same viscosity and dries hard, there should be no change in color of the wood , but structurally it would be stronger.

I wouldn't have a clue whether the Water base Poly will stick ,but since I never use it , that would not be a problem for me.

FredD

Re: Prestain

#6

Re: Prestain

Greg Muller

Fred,

I did use the wood hardner and it did change the wood color. I only used it in the decaying center area so it did not affect the much of the visable area.

Re: Prestain

#7

Re: Prestain

FredD

Never changed for me Gregg , but I have only used it on a Mahogany stump and some badly decayed Furniture leg bottoms.

Did it go lighter or darker ?

I thinks since you want the natural appearance , your ready for the finish coat .

FredD

Re: Prestain

#8

Re: Prestain

Greg Muller

It went darker but I was able to sand most of the discoloration out. I will be spraying this week and will post a pic after. Thanks for the help.