Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Which Router for Table - Suggestions

Posts

Which Router for Table - Suggestions

#1

Which Router for Table - Suggestions

David C. Lykins - Dallas GA

Well my Ryobi 185 has just about had it after using a 2.25 Olgee bit on some red oak while making some trim for my buddies aquarium stand. So now I may be in the market for a new router. I would REALLY like to stay under $200 as I'm still unemployed. However this project that I'm embarking on should make me more than enough proffit to pay for my new router.

Here are a couple of choices that I'm contemplating, they're in random order and I've just now started my research

Bosch 2 HP Fixed-Base Router - Model # 1617, $176.00

PORTER CABLE 1.75 HP Router Kit - Model # 9690LR, $149.00

PORTER CABLE 2.25 HP Fixed Base Router - Model # 892, $189.00

DEWALT 2-1/4 HP EVS Fixed Base Router with Soft Start Item #: 102458 Model #: DW618, $158.00

DeWalt DWP611PK Compact Router Combo with Fixed and Plunge Bases, $209.00Each

Those are just a few routers I found that I believe would suit my needs. What would be ideal is a router that has a built in height adjustment that can be adjusted with out removing from or reaching under the router table in order to adjust the height of the router. Yea I know, the next thing I'll want is a new router table..... Thank God I've got an Incra fence system. I just built a new router table stand last summer.

Your thoughts are very welcome.

Thanks!

Re: Which Router for Table - Suggestions

#2

Re: Which Router for Table - Suggestions

Mark Nowicki

David:

Milwaukee routers have the adjustment feature you are looking for.

Mark

Re: Which Router for Table - Suggestions

#3

Re: Which Router for Table - Suggestions

Bob in NE Ohio

David

Take a look at Triton, I think I just saw them advertised a Highland Hdware at $199 for a 3hp. Other than an ugly color it seemed to be a great buy.

Bob

Re: Which Router for Table - Suggestions

#4

Porter Cable 892 at Home Depot for $99 or less

Scott in Montana

Check your local Home Depot. A couple weeks ago they started discontinuing the Porter Cable 892 for $99. I picked up the floor model for $77 since it was missing its 1/2" collet and the box.

Maybe there are still a few Home Depots with them in stock? I've been told that you'll have to check in person since Home Depot's inventory system is almost always inaccurate.

Good luck!

Scott in Montana

Re: Which Router for Table - Suggestions

#5

TRITON

Jorge Casta�eda

is the only one designed for use in a table. Powerful great performer.

Re: Which Router for Table - Suggestions

#6

JL

Re: Which Router for Table - Suggestions

JL

PC 890 series. Look for the new ones at Home Despot or look for a reconditioned one elsewhere.

Re: Which Router for Table - Suggestions

#7

Re: Which Router for Table - Suggestions

Dave Paine

I have a Bosch 1617 which has been mounted under my table for several years. I do not recall when I purchased, but likely over 5 years ago This has done all I have asked.

I did replace the switch and a bearing.

This router does NOT have above the table adjustment. I mounted in a Woodpeck router lift, and later in the latest Woodpeckers router lift.

Other models you list have adjustments from the base without a router lift, such as the Triton.

If you go with the Bosch 1617, I have a "spare" Woodpeckers router lift waiting for a buyer.... :)

Re: Which Router for Table - Suggestions

#8

Re: Which Router for Table - Suggestions *LINK*

del schisler

here is a nice router table. I have that one and i find it will do everthing i want. Don't need all those fancy fence's. Only 3 fence's will do all the job's that i know of . Go here their are lot's of information . I have been using router's for yr's . their is also a video on the table .


http://us.oak-park.com/catalogue.html?list=RT01--

Re: Which Router for Table - Suggestions

#9

Re: Link is bad?

David C. Lykins - Dallas GA

Re: Which Router for Table - Suggestions

#10

Re: Which Router for Table - Suggestions *LINK*

del schisler

try this link


http://us.oak-park.com/catalogue.html?list=RT01--

Re: Which Router for Table - Suggestions

#11

Re: Which Router for Table - Snagged a 892

David C. Lykins - Dallas GA

Well after about 3-4 hours of driving to about every Home Depot close to me I finally snagged a Porter Cable 892 for $79, although it did have both the 1/4 and 1/2 collets, it did not have instructions, case, waranty card and most importantly the wrenches. There's a PC repair/outlet store in Fayetteville GA so if I need something for it I'm sure that they would have it. I haven't looked to see if my Ryobi or some of my other wrenches will fit. Either way, it was a IMHO a GREAT buy and should last me MUCH longer than the Ryobi did. However now I'll want a new hand held router I'm sure.

Anyway, thanks a bunch for the heads up on the 892, I believe it was worth the drive. Probably mount it in my table this morning, unless I have to drive to Rockler for a new router insert.

Thanks again guys, have a great weekend.

Re: Which Router for Table - Suggestions

#12

Re: Which Router for Table - Snagged a 892

Thomas S Stockton

David,

The wrenches that come with porter cable routers work but they are made out of stamped steel so I would not worry about getting a pair. You would be better off getting some really cheap open end wrenches and if you have to grinding one down to fit the flats on the shaft.

Tom

Re: Which Router for Table - Suggestions

#13

JL

And the wrenches are REALLY thin.

JL

I have a adjustable one for one of the nuts and a 1 1/8" for the other.