We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I'm doing some trim work and I need to have the trim pieces fairly deep, from 1" to 1 1/2" in most cases. I want the exterior to be jatoba, but I don't have enough jatoba to glue two 3/4" pieces together and plane to the size I need.
However I have an excess of European beech.
Can I glue these together? The average glue-up would be about 1" x 19" in square surface area. The largest would be 2 1/2" x 19".
I can't foresee any problem with gluing those two species together, except maybe the color difference where the beech is visible, but you could adjust that with stain.