Re: Decorative elements more, more, more
Clint Searl
The wood is plain sawn red oak, not the friendliest for checkering.
The whole lid was stained with a water based dye first, then the outlines were cut with a v-groove tool. It did skate a bit coming across the grain at an angle, but from five feet away it doesn't look too bad. Everything in the diamond was then stained darker.
Before gilding, I finished the lid completely with NC lacquer and did a final rubout with waxed 0000 steel wool, and washed it with naptha to get rid of any wax.
Dressed the outlines with the tool and colored them in with sign paint.
Laid the leaf on oil size inside the lines. Oil gilding doesn't burnish well, so I just hit it with a light coat of lacquer, followed by a final waxing.
The fabric veneer is washed cotton, ironed and cut to a pattern, and laid in wet lacquer with more lacquer brushed on.
The colored area was first painted with a bronze powder acrylic mix with blobs of brass powder mix dropped on, and when it was set up, spritzed with a patina solution, and further tinted with yellow and purple metallic dye stains. The panels were topped with NC lacquer.
I did buy the leaf when it didn't cost so much. There's nothing like it for making a statement.
Clint