Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

wall cabinets.

Posts

wall cabinets.

#1

wall cabinets.

Jeff

My apologies, I've searched, I've googled, I can't find the answer to my question.

I wish to build hanging wall cabinets for my garage. 5 cabinets, each 30 inches wide. (150 linear inches) worth. Most plans I've seen build each one as it's own unit, then screw it to the adjacent cabinet.

It seems terribly wasteful to have a 3/4 inch side, butted up to the adjacent 3/4 inch side.

I planned on a frameless carcass, a 3/4 inch divider, with 1/2 overlay hinges. Can anyone point me in the right direction?? Or is it better to just build 5 individual cabinets, and have this 1.5 inch block of wood between them? Thanks in advance.

Jeff

Re: wall cabinets.

#2

JL

Re: wall cabinets.

JL

Cabinets can get mighty heavy while hanging them.

I wouldn't have a problem joining a couple of them as you describe. I've see that done in many a kitchen. I would say do it in twos or threes - but not all five.

Re: wall cabinets.

#3

Re: wall cabinets.

Barry Irby

I don't know a lot about frameless cabinets so take this with a grain of salt.

I would consider building three cabinets and put them up in a 1-3-5 pattern with 30" between them. Then put a top & bottom on the spaces and install shelves. Hang doors on the spaces the same as 1,3 & 5. You could use French cleats to hang the actual cabinets. I might do this, because I am frugal...errr...really cheap.

OTOH, what are you really saving? The sides of two cabinets? Even though I think it would be relatively easy to do what I described, but it would require thinking it through twice and building slightly different parts. Wouldn't it be faster and easier to just build five cabinets?

Another thought would be to to build a "system" of parts. Make six vertical panels and hang them perhaps from the cleat, lay in tops and bottoms, shelves and install doors. then if you wanted to you could adjust the width or take them down in pieces and move them to another location.

Re: wall cabinets.

#4

Moses Yoder

Re: wall cabinets.

Moses Yoder

I would probably build 3) 50" wide units if you need 150", but in reality it would be better to build 3) 48" units for material usage such as ply for the backs. Also, frameless hinges typically overlay 11/16" but you have to have the right hinges so there is room for the door swing; we use the Blum hinge #75T1580 if you are interested. A typical 1/2" OL cup hinge for frame will have flanges on it that you don't want for frameless.

Re: wall cabinets.

#5

Ellis Walentine

Design it

Ellis Walentine

I'm trying to figure out a good answer for you, but I'm missing some important information: How deep and tall will these cabinets be? Is there some significance to the quantity of five cabinets or the 30" width you mentioned?

What I'm getting at is that I would build the largest cabinets I could, being conscious of material dimensions (48" x 96" plywood) unit dimensions (will it fit through the door?) and weight (can you lift it with or without help?). The overall width you specify is 150". If so, it seems to me that 144" should work. That would save plywood -- not a whole lot of net square footage, but your yields would be much more efficient, so you'd need fewer sheets to get out the same number of parts. And, you could build two 6'-wide cabinets instead of five 30" cabinets, thereby saving four vertical pieces, however deep and tall they might be. If shelf spans are an issue, you could divide the cabinets into three 24" bays instead of two 36" bays.

Door hinging isn't a problem. You can get half overlay hinges and full overlay hinges, so just choose the right ones for your application.

Ellis

Re: wall cabinets.

#6

Re: Design it

FredD

Ellis is on the right track for the best use and conservation of material and i have built and hung cabinets for garage storage units ten fee long ,but they did not exceed 42" inches in height and the help I had , worked in my shop, so there was no danger of a accident.

Think about the last part, plan ahead on what you can handle with or without help and whether the help is experienced or just a strong neighbor.

FredD

Re: wall cabinets.

#7

Re: Design it

Jesse Cloud

Cabinet installers often use mechanical lifters. Don't know if you can rent them, but one on either end would probably do it...

Re: wall cabinets.

#8

Re: wall cabinets.

Terry in Edmonton

Why not use 5/8 material and save some weight? If you build individual boxes and screw them together there will be lots of strength. 5/8 is the standard for kitchen cabinets when using Melamine.

Re: wall cabinets.

#9

Re: wall cabinets.

Jeff

Thanks for all the ideas. There is no significance to the 150 inches, just that is what 5 - 30 inch cabinets came out too. The back wall of my garage is 26 feet, ultimately, it will be all cabinets. Wall hanging cabinets seemed like the first step. Since all my tools are in my garage, I don't have to worry about getting the cabinets in/out of the garage or thru the doorways. Being CHEAP...I do want to conserve lumber where possible. Which was the original question of my post, could two adjacent cabinets have a common sidewall and mount the cup type half overlay hinges? I am now wondering if a wall cabinet 24 inches high, and 48 wide would be a better use of materials? the ceiling in my garage is 11 1/2 feet tall, so I want to clear up my floor space and put as much crap on the walls as I can. I do have a lot of shelving units already. I wanted to do these boxes, so I can keep items a little less dusty. The plan is also to use this as a dry run for kitchen cabinets. So whatever I can learn in this process I can then apply to my kitchen.

Re: wall cabinets.

#10

11 1/2 feet

Jerry Gibbs

shelves that are too high get filled with junk and ignored because you can't see in them.

Re: wall cabinets.

#11

Re: wall cabinets.

Joseph Mulherin, Sr

Jeff, why don't you do as Dustmaker Mike did and have the local high school make the number of cabinets you wish to have. That will give the students a project to work on and learn something for their future employments and life hobbies too.