not if he makes much stuff
Bill Tindall
I buy about 300 bdft of #2 common poplar every now and then for secondary wood in furniture. Considering the cutting losses in this grade, just a few projects use it up. For example, in the bow front I am building (approx. 3' x 2' x 5') I have used over 100 bd ft of #2 common poplar for the drawers (the bow fronts alone used up 50 bdft), back and framing.
The lumber can be turned into house parts as needed and that application can use up hundreds of bdf in short order. There is well over 1000 bdft of poplar scattered about our house in the form of trim, shelving, doors, cabinets etc. I find that #2 common makes great shelving and a great alternative to plywood. I don't mind knots in closet shelves.
Were it mine, I would sort it by grade, burying the best lumber in the stack to keep weight on it and putting the low grade on the top. Once it was well air dried, something that will come to pass next summer,early summer if you have good air circulation, I would pull out a few hundred bdft of mixed grades and get it somewhere where it will get dry enough to use- kiln, loft, what ever. The rest can stay in the stack outside for decades if it is covered and sprayed to keep the buggies out of it. Never dead pack lumber out doors, even after it is air dried.
I presume it is 16' long? You will come to hate handling lumber this long but long lumber yields less waste. I certainly wouldn't advocate shortening it. You are going to need a mountain of piling sticks. See if the mill has some well air dried stuff you can cut them out of. They need to be precisely the same thickness or the pile can get out of whack. Just a 1/32" compounded over 20 layers is nearly an inch.