Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

rocking chair rockers

Posts

rocking chair rockers

#1

rocking chair rockers

ronald rimmer

A few weeks ago I posted about repairing rockers. I have since removed both the rockers for reasons I won't go into now but I need to know how to drill the spindle holes in the new rockers.

Any advice or links?

Ronnie

Re: rocking chair rockers

#2

Re: rocking chair rockers

Joe Mohnike

Clamp your new rocker to the old. Draw a center line of the hole onto the new rocker. Clamp in a drillpress vise. Use a twist bit position the rockers so that the bit will run smoothly in and out of the old rocker. Move vise, carefully, and center new rocker under bit and drill. Has worked for me many times.

Good Luck

Joe M.

Re: rocking chair rockers

#3

Re: rocking chair rockers

ronald rimmer

Thanks Joe,

I intend to try this over the weekend, I don't have a twist bit that size,any reason I can't use a forstner bit?

Ronnie

Re: rocking chair rockers

#4

Re: rocking chair rockers

Joe Mohnike

No problem, just make sure the bit runs up and down freely, and you may have to clamp the work to the table as the F-bit will cut from the outside edge on curved surface which may cause some control problems.

Good Luck

Joe M.