Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Planer/Jointer blade sharpening angle???

Posts

Planer/Jointer blade sharpening angle???

#1

Jesper, Denmark

Planer/Jointer blade sharpening angle???

Jesper, Denmark

My DC 380 planer and DJ 20 jointer were both delivered with HSS blades, sharpened at a 30� angle. I bought some Freud replacement blades some time a go, and they are sharpened at 45�.

Both machines cut bevel down, so the leading angle of the cut has not changed, and there seem to be plenty of clearance in the cutting circle with the 45� blades. It seems to me that the quality of cut has not changed, but there is less vibration and less chance of chipping the 45� blades.

I just now have to have the original blades sharpened, so is there anything I am missing? I am leaning towards hav�ng them sharpened at 45� also.

Re: Planer/Jointer blade sharpening angle???

#2

Re: Planer/Jointer blade sharpening angle??? *LINK*

Keith Newton----Little Rock, Arkansas

Are the 45� blades carbide? Because hardness comes at the price of brittleness, it can't be sharpened to fine angles, without risk of chipping.

This seemingly simple question has some pretty complex considerations, depending on the cutting angle of the head, and the kind of wood etc.

Here is a great link that covers a lot of it.

http://www.woodweb.com/knowledge_base/Knife_Grinding_and_Woodworking_Manual_6.html

The cutting angle in my heads is high, 30�, so I sharpen with a 20� face bevel, which eliminates tear-out on figured wood, but requires about 50% more power.

One good reason to sharpen a finer angle, would be if you do any honing of the knives while they are in the head. I do this on my jointer about 4 times between taking them out and grinding. The greater clearance angle on the back of the blade makes honing easier. I can move my outfeed bed back out of the way, and hone the 4 - 12" knives in about 15 minutes, using the 2" x 6" diamond hones that I have glued onto wooden handles.


http://www.woodweb.com/knowledge_base/Knife_Grinding_and_Woodworking_Manual_6.html