Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Scissor sharpening

Posts

Scissor sharpening

#1

Scissor sharpening

Robert R. Clough

Seems to me I remember a small tool used to sharpen scissors but I can't find any references to anything like that. I've looked at Lee Valley, Rockler, Elliotts Ace, etc - no luck. I don't want special belts or machines. Any suggestions?

Re: Scissor sharpening

#2

Re: Scissor sharpening

Gary Hodgin

Not sure if this is what you're looking for but accusharp makes a small hone for scissors. I've never used it but have heard others recommend it. There are other similar hones on the market. Go to www.accusharp.com to see or google scissor sharpener.

Re: Scissor sharpening

#3

Re: Scissor sharpening

Barry Irby

I sharpen scissors with a diamond hone. I have one for kitchen knives and another made for fishermen as a pocket hone. Just "file" across the blade at the angle already there. About 80 or 85 degrees to the mating faces. I file toward the center to turn a bur on the cutting edge. Just did it a day or two ago to a cheap pair I found. They went from not cutting paper to being sharp in about three strokes on each blade.

Re: Scissor sharpening

#4

Re: Scissor sharpening

Gary Hodgin

Barry,

I use DMT mini-hones also and just stay on the bevel. Those hones are very useful. I use them for all sorts of small lawn/garden tool blades and to touch-up kitchen knives.

Re: Scissor sharpening

#5

Thank you all

Robert R. Clough

I purchased an Accusharp type tool. Seems to work well.