Revive your ZCI
Clint Searl
I don't know if this is new, but it just occurred to me. Fill the slot, or build out the slot edges for a dado stack, with Bondo and run the blade/stack up to create a new zero clearance slot. I'm gonna try it.
Clint
Knowledge You Can Build On — Est. 1998
Revive your ZCI
Clint Searl
I don't know if this is new, but it just occurred to me. Fill the slot, or build out the slot edges for a dado stack, with Bondo and run the blade/stack up to create a new zero clearance slot. I'm gonna try it.
Clint
Worked for me
Dale Lenz
did not want to take the time to make another one. Filled my saw throat with epoxy with some help of masking tape, as good as new!