***SURVEY: THE IDES OF JANUARY (+5)***
Ellis Walentine
Yes, folks, it's time yet again to trot out another in our ongoing series of thought-provoking, bi-monthly woodworking surveys. This new question was suggested by Barb Siddiqui and is inspired by a single word in Charlie Belden's recent "Hypothesis Challenge" on the Turning board: Intimidation. We all have an intimidation threshold --- maybe more than one --- in our woodworking endeavors: the point at which conscience or fear or hard-won experience kicks in and says, "Wait! This is too dangerous," or "I can't do that." This month, I'd like to hear about the things that scare or intimidate you -- lines you've drawn for whatever reason, how these limits have shaped or limited your woodworking style or accomplishments, and what, if anything, you've done to manage and/or surmount them.
As always, your answers will be excerpted, collated, sliced, diced and served up in our "News & Views" column in the next issue of Woodworker West magazine, which, incidentally, has just launched a digital version.
Thanks as always for participating!
Ellis Walentine, Host
PS Here's the latest on Woodworker West's new digital edition...
To celebrate Woodworker West's 24th year, it has posted a digital edition of its January-February issue at: www.sopdigitaledition.com/woodworkerwest , including Ellis Walentine's "News & Views from WoodCentral.com" column.
Also in this issue, there is a preview of the exhibit "Family Tree: 65 years of Woodworking in Northern California," which is opening this weekend, as well as pictorials from the Hawaii Wood Show, Veneer-Tech's Craftsman's Challenge, and the Western Design Conference, plus two special employment opportunities in the Marketplace section. Subscription discounts are available at: http://www.woodwest.com/subdiscount.html
Check it out. I think you'll like our new digital magazine!
... Ron Goldman, Publisher
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#2Paint ! . . .
steve mackay
On wood that is. Paint scares heck out of me. Too many times I have a customer that wants a model painted. First, personaly, I won't paint wood. Its too darn purty as is. Second, beyond a spray can, I'm not equiped (spray booth or even an area that is remotely dust free) to do it. Third, I'm just not good at it. I know it and I'm OK with it. My stuff has, at least, ten coats of poly so if a customer wants to give it a shot they have a perfect base. But I AIN'T do'n it. If you don't like the way it looks when it leaves the house feel free to NOT plunk down your money. Its about my only deal breaker.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#3
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
JL
One word - Marquetry. It's beautiful. It intimidates the heck out of me.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#4
Freehand tablesawing
David Barnett
Hey, I've seen it done. And that's where I draw the line.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#5
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
Clint Searl
Every tool in the shop, whether it be powered or not, has the potential to inflict pain and/or permanent harm, so the only thing that scares me is my own foolishness in using them. I try to understand the hazards of the tools and take the appropriate precautions to preclude mishap. Concentrate on the activity. And keep booze out.
Clint
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#6I am with jl on this
McKay
I used to be intimidated with chair building until I took a class with Chris Gochnour. Now I see panels that are done by Patrick Edwards, Paul Schurch, and Silas Kopf and I just lust for a portion of their abilities. I am not artistic so I try and develop what I have but that is not much. I have made a number of marquetry panels, but very simplistic.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#7this is a good one
Bill Tindall
I would be a vastly more experienced woodworker were it not for "Fear of the Untried". Almost you can fill in the blank. Until I see it demonstrated before my eyes I consider it too hard to do and don't try it. You can just about fill in the blank for what "it" has been- dovetails, mortises, hand tools, veneering, jig-less sharpening, using a skew, carving(wait that fear is justified, no talent).
I am trying to "get out " more and visit shops and take a class or two. It all began with a trip to College of Redwoods and the barriers have steadily fallen since. I don't find books useful for overcoming fear of the untried.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#8Re: this is a good one
Jesse Cloud
Lifting things that are bigger than I am, e.g., sheets of ply, cabinets, etc. May be a reasonable fear as I have a tempermental back. As the saying goes, 'Fools rush in...", so I seldom fear trying something new.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#9Veneer and Inlay
Ray - Middletown, IN
I'm with Bill in that I would like to see a show and tell or attend a class/seminar to get over the fear hump. I used to have hand cut dovetails and spray finishing on the list but a couple of day classes got me over those curves. Having said that I am getting geared up to do my first veneered piece. I do find that the fear factor feeds my need to procrastinate.
Ray
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#10
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
Joe Bradshaw
My wife scares me.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#11Anything done by Mr. Skaggs
Dan Donaldson
Or the other people here on Woodcentral that have such a great sense of design. I would love to be able to do some of the projects they do, but do not have the design sense to come up with anything like that.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#12Re: ***SURVEY: THE IDES OF JANUARY (+5)***
Joe Mohnike
Intimidation-If you do not feel safe, or confident, doing something then don't do it. Especially useing tools, you will be nervious and clumsy and stand the risk of injuring yourself, damageing a tool or the product. Find another way which does not intimidate you.
Joe M.
ps; If you don't like to paint, use colored contact paper;-)
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#13Re: ***SURVEY: THE IDES OF JANUARY (+5)***
Dave Bair, Eaton Rapids, MI
Intimidation: the table saw three-blade-molding-head accessory I bought from Sears years ago. The three cutters are attached with screws (the kit came with 5 sets of cutters). The cutters are so wide that a zero-clearance insert is out of the question so you use it without any insert. When you fire it up, it actually creates wind in your face and an airplane-propeller whirling sound. I used it once; I was so tense I actually had sore muscles the next day. It still sits in the drawer of cast-off saw blades, waiting for the project worth it's scariness.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#14I like Joe's response. LOL :-)
Ray Carson - Lawrenceville, NJ
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#15Turning...
John in NM
I've just never gotten the hang of it, and I never seem to practice enough to make me ok with catches. Perhaps I'm grinding my chisels too aggressively, but most seem to come more like scrapers than chisels. Its funny because I don't fear an injury, there's just something about the unpredictability of a catch that makes me intolerably jumpy 
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#16Re: ***SURVEY: THE IDES OF JANUARY (+5)***
Ray Carson - Lawrenceville, NJ
I will try any project provided I have the right tools, the time, and a good understanding of what needs to happen. Step by step. A good set of plans helps too.
I've run over power cords. I've had boards kickback. I've jabbed and cut myself countless times with all sorts of sharp and blunt objects. I've dropped things light and heavy. I've cut joints wrong. I've measured wrong. I've gotten multiple liquids and debris in my eyes. Those things happen and we learn from our mistakes. They never intimidate me though.
Working on a project beyond the point of exhaustion is usually what happens to me. It's knowing when I've had enough and I'm tired. It's when I get hurt because of it or I make a costly or stupid mistake.
It's then that I remind myself, where eye protection, keep an on the time, don't set goals during a project that will force me to finish a step when it's already very late at night or I have to be somewhere with the family. Make sure that things are clamped properly, chucks are tightened, tools are sharp, the power is off.
I guess my hesitation (intimidation) comes when I want to do any woodworking or any other project that I need to ask myself, "Do I have enough time and energy to go to the next step or start that new project."
I've learned to turn down projects, and only start new ones when I have the proper time. I would rather take more time on a project and do fewer than rush and get hurt or have it turn out like garbage.
Electrical work intimidates me, not woodworking. If I don't know what I'm doing I call "Da Man" or I get help. I've been jolted as I'm sure some of you have and I don't like it. Working "in the box" scares me.
Not sure if my rant is what you wanted Ellis but it was interesting to think about.
Ray
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#17I hear ya Dave
Dave Peebles Lyons, Ohio
When I first started woodworking my Father-in-law had one of those unholy beasts.
He asked me to help him do some panel raising with them. He set up his 50's table saw with the demon and we went to work. Just for your info, the table on the saw was about 14 x 10. That explains the need for my help balancing the the long panels.
It had just come up to speed... making a sound like a Life Flight helicopter when all hell broke loose. One of the inserts came loose and flew past my head at what seemed like supersonic speed. The lack of balance made the tablesaw begin to do some crazy jumping, as did I. We did finaly get everything shut down. I had never been so scared in my life. And I was a lineman climbing 50 foot poles. 
I gently informed my Dad in law that I would never help him with that task again. He said he had done it many times with no issues. But was pretty freaked out too.
The next week we built a really nice router table with a 3 hp router to do the same task.
Still my worst moment in the woodworking field.
Best wishes,
Dave
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#18Re: ***SURVEY: THE IDES OF JANUARY (+5)***
Dave Paine
Looking at the definition of "intimidate" one of which is "To make timid; fill with fear" I have not yet felt such emotions about my woodworking.
If I were to consider times I have been nervous or concerned, even pensive, this has happened on more than one occasion. Big understatement.
So responding with the latter definition.
I am nervous or concerned any time I do something for the first time. This may be due to the potential for bodily injury, or the potential to ruin a piece.
Someone else responded about time. This is how I normally respond to such situations. I stop what I am doing, and come back later. Typically after I have given the situation a lot of thought. May be hours, may be days later.
I have never regretted "sleeping" on a situation. I have woken up many nights and spent time pondering the solution. I normally will come up with some solution which will make me more comfortable with the operation or process.
A recent example was needing to trim some 3/4in wide strips which were glued assemblies and had bowed. I needed to make straight and maintain the orthogonal angles of the original cut. I ended up making a jig of a 2x6 piece with aluminum track to allow several screw style clamps. Worked very well and kept my hand away from the blade.
Another case was making a cribbage board. This required many holes. I was concerned about tearout. No need to be concerned, I was able to achieve in almost all holes, some were 3/16in deep.
Second attempt repeated the results. Finally realised the drill press was set too slow. Increased the speed, and third time was the charm.
Another case was cutting pieces from a slab to make an end grain cutting board. Made the cuts, flipped the pieces and the result was not the perfect line I intended. Turns out my assumption of the blade being orthogonal to the table was flawed. It was close, but not close enough for this operation. Note to self, always recheck calibration before a critical operation. I now set with the set square, and follow with a test cut on a scrap piece of 4x4 redwood, and then test the resulting cut with the set square. If I see any light I tweak and re-cut. I have checked the square to confirm it has true 90 deg. The first two squares turned out to be less than true. This one is true and holds the angle.
I have made many cuts over the years with various tools which had the risk of losing control of the piece. Always a concern. I normally try to go slow, and be comfortable I have control of the piece or else I stop the cut and try another way. Sometimes the alternative takes a long time.
I do not have a lathe, so the concept of turning is not yet experienced. I know how I felt when I made my first table saw cut. Nervous was an understatement.
I will eventually try turning, and expect the initial experience will be one with a feeling of concern.
Something about that which does not kill us can make us stronger.
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#19
Great reply, Dave. Thanks.
Ellis Walentine
I read a lot of creativity into your response, which is a big part of the glue that binds us woodworkers together. How we overcome our reservations and roadblocks is the important thing. My own theory is that everything is parts and pieces and all obstacles can be overcome. The only question is, am I clever enough to figure out how to overcome them -- safely, of course, as you emphasized.
RE: Turning -- take it from me that it is very doable and quite rewarding.
Ellis
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#20I like your thinking Dave.
Ray Carson - Lawrenceville, NJ
You just said it more eloquently.
Try turning, it's not as hard as you think. Name one other machine in a shop that you start and complete right on the machine. Finish and all.
Ray
Re: ***SURVEY: THE IDES OF JANUARY (+5)***
#21Re: I hear ya Dave
Dave Bair, Eaton Rapids, MI
I always feared the cutters coming loose, now I have proof my fears were grounded. Your story reminds me of the time I was setting up a dado blade and, after making a practice cut with the zero clearance insert removed, I shut down the saw and watched in horror as the stack spun down and backed off the arbor nut. I ducked as the outer blade fell off the arbor, flew right out of the saw and embedded itself in the OSB wall covering. No more dado stacks over 3/4" for me.



