Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Porch millwork finish

Posts

Porch millwork finish

#1

Porch millwork finish

KESinMN

Contractors are finally getting to the jams and millwork around my 3 season, southern exposure porch. I originally wanted to paint the wood but when it arrived it was simply to nice to paint. However, I really don't want to stain and varnish because of the 365 days of direct sunlight and Minnesota winters. Any ideas on how to quickly finish the wood?

Re: Porch millwork finish

#2

Re: Porch millwork finish

Bill Howatt

I wouldn't worry the least about the winters but the sun is a totally different issue. I think anything that has some degree of transparent finish will have a problem with sunlight.

I have a cedar house and use Sikkens Cetol, it has a very thin first coat and the second coat Cetol 2,3+ contains more solids which offer more UV protection. Where it is in the shade it is still good after about 15 years, where it is sunny that is a different story. Requires maintenance about every 3 years and if left a lot longer, pressure washing will take everything off down to bare wood. For house siding this isn't a big deal but if you are only doing trim it would be a lot trickier depending on what is surrounding the trim.

Whatever you use, follow the directions carefully. With products like Sikkens that are supposed to penetrate, getting rid of the mill glaze is very important.

Bill

Re: Porch millwork finish

#3

Re: Porch millwork finish

FredD

Paint is the fastest , easiest , longest lasting of any outdoor finish and for Porch Bric-a-brac the traditional one to boot.

FredD