Where to start with carving?
dlf901
Hi all,
Now that I'm selling more of my boxes, canes, small turned boxes on my drill press, hard maple spinner dominos with box, mirrors, furniture,etc... I like to begin adding some carvings to some of other my work. I've done some wave patterns on boxes with a 3/8" carbide burr and a die grinder , but that's the extents of my experience carving.
These are some of the things I need to know:
1. What carving tools will I need? I'm not looking to buy a lot of tools to start. A small set and with a mallet to get started with. Before my father passed on, he gave me a german made set of palm carving tools and a set of italian rifflers. He said they were worth quite a bit, but I'm a tool hog. I'm sure they'll get a lot of use from them as soon as I learn to sharpen. I did buy a set of 3 FlexCut knives. They cut very well. So that is a start. I own 134 router bits. I bought them over many years. I figured the same would be true for carving tools.
2. Which are the most essential carving tools for all projects?
3. Do I buy High Speed Steel or Tempered High Carbon Steel? I know high carbon steel takes a great edge, but it doesn't last very long. Especially on hard woods.
4. What type of sharpening system will I have to invest in, or is it possible for me to build it myself?
5. What book, books, or DVD's should I start with? About 90% of these materials are at my local library.
I'd would be grateful for your input. Just remember this is my first attempt at this type of art.
Sincerely and Respectly,
David Frame




