Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Warped/cupped wood

Posts

Warped/cupped wood

#1

Warped/cupped wood

David Lykins - Dallas GA

Well since I'm going to finally take a stab at making some money doing some of my wood working after being unemployed for about 2 years, I decided to sort out all my wood. While doing so, I found some 1/4" or so thick exotic peices that I aparently had cut for some project but never got around to doing anything with them. I beleive my basement has a fair amount of humidity and some of the wood peices have a slight cup to them. Seems to me I read where you could lay the wood on the cement floor with the concave part of the cup facing downward and lay something heavy on top of the wood and that would flatten out the wood?

Any suggestions are greatly appreciated.

Thanks!

Re: Warped/cupped wood

#2

JL

Re: Warped/cupped wood

JL

Sun bathing may work in your situation. You really want to take moisture out - and regulate the remaining moisture. I don't know if you can get consistent moisture levels by laying the wood on the floor.

I would try giving the pieces a "sun bath" with the convex side up. You could also try heat gun or hair dryer - but that would be way too putzy.

Re: Warped/cupped wood

#3

In most cases its not a problem

Bill Tindall

One should expect solid wood 1/4" thick to cup. However, it will take little mechanical force to straighten it. So, for any application where the wood is captured in a frame, or whatever, the cup is not a problem. Whatever the 1/4" wood is fastened to will hold it flat.