Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Need Paint Advice

Posts

Need Paint Advice

#1

Need Paint Advice

Steve in Phoenix

I'm building a coffee table to match a couple of chairs we bought in July. The color of the legs/base will match the chairs, and the table will be orange. And a working 1954 Western Electric phone, as well the Atomic Ranch book will be added as the final touch.

I've included a photo of the nearly complete assembly. Just a little work on the base piece spanning the legs, and I'll be ready to get it finished up.

The design and construction has been my excuse to not think too much about the finish. I just don't know much about painting furniture. It doesn't matter if the grain shows, and I would like the table to handle spilled drinks, and feet placed on it. I don't have a sprayer, so it's brushes for me.

I painted some bookshelves with some latex I had. That was a mistake. I did paint some shelves with Rustoleum (acrylic?), and those have held up very well. I've never tried my hand at oil. Would I need to add a clear-coat protective finish on any paint I would use?

Thanks for the help!


Re: Need Paint Advice

#2

Clint Searl

Re: Need Paint Advice

Clint Searl

Several coats of flat interior latex/acrylic in the space-age colors of your choice, sanded between coats for level even coverage, topped with 2 or 3 coats of a clear water borne poly floor finish. The poly can be rubbed out with auto rubbing and polishing compounds if desired.

Clint

Re: Need Paint Advice

#3

Re: Need Paint Advice

Steve in Phoenix

Thanks Clint! Why water borne? Do others (ie Minwax wipe-on) react with paint?

Steve

Re: Need Paint Advice

#4

suggestions

Bill Tindall

If you what just paint then any oil based enamel paint will do. Thin it a bit and it will level better. If you want it glass smooth then prime with oil Kilz, sand smooth and then to coat with the enamel.


Or, if you want a "transparent" paint, first coat with milk paint, as illustrated with the canisters shown in the picture . I hate real milk paint and use the General Finishes "milk paint" instead. Same colors but it goes on easier and it is just plain easier to deal with. After dry, over coat with varnish for durability.

Re: Need Paint Advice

#5

PS, nice design

Bill Tindall

If you are going to make things this nice, take the time to learn to finish.

Re: Need Paint Advice

#6

Clint Searl

Re: Need Paint Advice

Clint Searl

IMO, it's a better finish: clear and non-yellowing, just as or more durable, easy to apply and multiple coats in a day, can be rubbed out, water cleanup, and leftover finish has an infinite shelf life.

Clint

Re: Need Paint Advice

#7

Re: PS, nice design

Steve in Phoenix

Thanks Bill. I have used plywood, stain, and especially paint very rarely. It's usually solid wood with a clear, durable finish. But this contemporary style we are getting into requires trying new things.

Steve

Re: Need Paint Advice

#8

Re: Need Paint Advice

Steve in Phoenix

Thanks again!

Re: Need Paint Advice

#9

Ellis Walentine

Which brand?

Ellis Walentine

Hiya Clint,

I was wondering whose WB poly you prefer? Where do you get it in our area?

Ellis

Re: Need Paint Advice

#10

Clint Searl

Re: Which brand? *LINK*

Clint Searl

Hi, Ellis,

I got started with Varathane (Flecto) products in the early '70s with their oil poly and urethane(?) modified linseed oil, and later the waterborne poly version, all with very good results. I suspect that contemporary waterborne brush-ons are all formulated pretty closely, though I've continued with Varathane. I also like the idea that their floor product contains aluminum oxide for increased wear resistance, even if it maybe doesn't make a difference on furniture.

I recently picked up a gallon of Bona Mega, an oxygen-crosslinking polyurethane (OCP), waterborne floor finish that I want to try. I'll post a review when I do.

Clint

P.S. I'm taking a snow day on my Kubota :D


Bona Mega

Re: Need Paint Advice

#11

Snow day???

mdclor

Clint,

You won't need a Kubota for a snow day in ABQ! :D :D :D

Merle

Re: Need Paint Advice

#12

Clint Searl

Re: Snow day???

Clint Searl

There was still snow on the ground in our Placitas back yard when we left last Friday, just not as much. :\

Clint

Re: Need Paint Advice

#13

Re: Need Paint Advice

Steve in Phoenix

Clint,

I'm going with Rustoleum's Painter's Touch. I called around about orange paint, and didn't get very far. The color looks perfect, but my concern is the clear topcoat. I can sand/steel wool imperfections from using spray paint. But I'm less inclined to use the matching clear spray as a smooth application seems a bit hit or miss (I think). Can I use the water-borne poly over spray paint?

Re: Need Paint Advice

#14

Clint Searl

Re: Need Paint Advice

Clint Searl

I'm pretty sure it'll be OK but testing it on a piece of scrap may be wise.

Clint

Re: Need Paint Advice

#15

Re: Need Paint Advice

Steve in Phoenix

Thanks again Clint!