Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Band Saw Blade Recommendation

Posts

Band Saw Blade Recommendation

#1

Band Saw Blade Recommendation

Tom Pilsbury (Chicago)

Okay, it's a minor stealth gloat too. Just bought a (used) 12" Jet Band saw to replace my 12" Craftsman that was on its last legs. Cleaned it up and made some minor adjustments and it's running beautifully. Never knew a bandsaw could be so quiet! All I need to do now is replace the 1/8" blade (that burned the hell out of a piece of maple) with a good 1/4" and 1/2" blade. It's a foregone conclusion that Timberwolf is the best blade so I'm halfway there. So for the 1/4" what is the best all around blade as far as TPI and hook etc? The 1/2" I want for resawing (max <6") so I'm thinking the fewest number of TPI is best. The machine requires 82" blades.

Re: Band Saw Blade Recommendation

#2

Just to nitpick my own post...

Tom Pilsbury (Chicago)

Is it Band Saw or Bandsaw?

Re: Band Saw Blade Recommendation

#3

Re: Band Saw Blade Recommendation

wilbur

I say bandsaw.

I'd go with a 1/2" 3 tpi hook tooth (positive claw) from Timberwolf. I have this blade, and the only time I change it is if I need to make a curved cut with a tight enough curve that the blade can't make the turn.

For the next blade, I'd suggest their 1/8" 14 tpi blade for curves, unless you see yourself making a lot of curved cuts in thick stock. The 1/8" blade will handle all curved cuts in 4/4 stock that a 1/4" blade can, but not vice versa, and for curved cuts the benefit of a 1/4" blade are pretty minimal. I have this 1/8" blade, too.

Then I would get a 1/4" with a tpi appropriate for what you anticipate cutting, with thicker stock requiring lower tpi. Here you can call them -- I've found the Suffolk Machinery people to be real helpful on the phone. In fact, it's easier to just call them, tell them what you want to cut, and they'll tell you what's the best blade for you. But for what it's worth, I have a 1/4" 6 tpi Timberwolf blade, and I rarely use it.

Re: Band Saw Blade Recommendation

#4

are you frugal?

Bill Tindall

I am astonished at what people are willing to pay for band saw blades. I presume that blades used by furniture factories and woodworking shops are good enough for my work so I buy where they buy, which would be a local saw shop.

Everywhere has them. They buy 100' lengths of band saw blade stock and weld it into what ever lengths one needs.

For example I recently bought several 1/4" to 3/4" by 141" blades from Misenheimer in Morristown, TN and they ranged in price from $8.25 to $11.40 each. In this case they are Lenox or Starrett blades.

I suppose the Timberwolf blade might be better in some way, but I am not sure what improvement I would see in my usage.

Re: Band Saw Blade Recommendation

#5

Re: Just to nitpick my own post...

Howard Acheson

I've seen it used both as a single word and as two words. I think two words is the more common and correct..

Re: Band Saw Blade Recommendation

#6

Re: are you frugal?

Howard Norman

For me the Timberwolf blades are the way to go. The local saw shop does not make blades and the stock blades that are available locally are inferior to the Timberwolf blades. Of course there are not a lot of furniture factories around Prescott AZ.

Re: Band Saw Blade Recommendation

#7

Re: are you frugal?

wilbur

I have nowhere to stock 100' rolls of bandsaw blade stock, and I figure that $12 is a fair price to pay someone to weld a custom length bandsaw blade for me, which is essentially what you get when you order a Timberwolf blade. So the price difference is a wash.

Re: Band Saw Blade Recommendation

#8

Or if you're really frugal...

John in NM

You can make your own. Buy a roll of blade, cut by pinching two crescent wrenches on the stock next to each other - quick twist and the blade is cut. File a but scarf in the stock and hard solder using a plumbers air-acetylene torch, or in a pinch a bernzamatic with mapp gas. Clean up the joint a bit with a grinder. Last time I made these blades ended up costing around $5 each. I'm about due for another batch, already have 200' of 1/2" stock, bought from Victor Tool in Brooklyn. The joint usually breaks once the blade is good an dull and receiving more stress in use than it really should.