Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

A wine cabinet

Posts

A wine cabinet

#1

A wine cabinet

Bruce, a MN Galoot

Somewhat more than a year ago, our son became married to a great girl, and we offered them their choice of wedding presents. Seeing as how I've made a significant portion of their household furniture, they asked for me to make them a wine cabinet. I gave them the task of choosing a design and a color, so they sent a pic, but then wanted a bunch of changes. They wanted a design that would match their existing dining table both in design and color. It seemed like good old Honduran mahogany to me.

Well, I couldn't find Honduran mahogany any place, so I made the thing out of African mahogany, not sapele. It turned out to be a nightmare of a wood, not properly dried, it would warp at the slightest provocation, almost spiteful. The color varied a lot, and the grain, while nice in appearance, nearly defied hand planing. Now, I almost always do surface finishing and all hand fitting of joints with hand tools. The joints went well, but the finishing had to be sanded, much to my disappointment.

Anyway, the original pic was of a simple carcase with bun feet, but they didn't like the feet, so the only way to get a match with their table design was to make the whole thing frame and panel with African mahogany plywood, available only in 3/4" thickness. The frame is twin tenoned, which worked well with a router, because of the relatively narrow rails. It needed to extra racking resistance of two tenons at each joint.

The cubbyhole part was probably the worst, most godawful experience I've had in recent years. It has more than 30 joints all of which had to go together at the same time. I used hide glue, a true godsend, for the open assembly time. I needed more than the 30 minutes normally allowed, and I had practiced a couple times before final assembly. There's just nothing that can beat liquid hide glue for long glue-ups and clean-up.

The glass in the doors is safety glass - plastic laminated between two regular panes of glass. They have a big golden retriever, still young and rambunctious, so having glass that won't shatter easily was a requirement.

As it turned out, it took all of my warm-weather shop time, close to 8 months of on-and-off work.

I will give a great big thanks to Bill Houghton, my good friend, who had to listen to endless bitching about this, that and the other thing throughout the whole project.

We didn't have a good place for the pics, so our son took the shots in his living room. Please excuse the background.

Forgot to add, the finish is Minwax English Chestnut oil stain with Minwax Antique Oil Finish rubbed out with 400/600 wet-or-dry sandpaper over the base. The top is the same stain with Minwax Wipe-On Poly. The back and cubbyhole are 1/2" baltic birch with a witches brew combination of stains to try to match the mahogany.



Re: A wine cabinet

#2

Re: A wine cabinet

Lee Schierer McKean, PA

Very nice. Now they will want wine as birthday and Christmas presents to fill it and don't forget the nice wine glasses..

Lee

Re: A wine cabinet

#3

The listening was all worth it

Bill Houghton, Sebastopol, CA

Nice little cabinet.

Re: A wine cabinet

#4

Re: A wine cabinet

Jim Dillon

Bruce,

Very, very nice with lots of room for wine glasses, wine books - and wine too. Sorry to hear you had so much trouble with the African mahogany. My experience has been the opposite and I would use it again - with fingers crossed. A beautiful gift indeed.

Jim

Re: A wine cabinet

#5

Re: A wine cabinet

David Yoho

Bruce, it sounds like you fought a real battle with that project but the pictures look like you indeed won the war! Nice work.

Re: A wine cabinet

#6

I like the design

Bill Tindall

African mahogany can suffer interlocked grain and it sounds like you got some. All's well that ends.

Re: A wine cabinet

#7

Re: A wine cabinet

Thomas Skaggs, Foothills of Mount Level

Really nice cabinet. Gosh they are lucky to have you making furniture for them I bet they have a really nice place adorned with your work. It will be enjoyed for a very long time.

Tom

Re: A wine cabinet

#8

Re: A wine cabinet

FredD

The result sure looks like it was worth the effort Bruce.

BTW , don't hold your breathe until you find some Honduran mahogany.

FredD

Re: A wine cabinet

#9

Wow!

Jesse Cloud

Thats a beautiful piece! I really love the color. I tend to stain African Mahogany darker, but yours is eye popping.

Thanks for sharing.

BTW, I tried Terry Masatchi's tip of using a dilute glue size on the interlocking grain before using hand tools - made the job easier and more effective.

Re: A wine cabinet

#10

Jim in Burlington Ont.

Re: A wine cabinet

Jim in River Oaks, Ont.

Beautiful! :D

Re: A wine cabinet

#11

Alan Young

Re: A wine cabinet

Alan Young

Bruce, Lovely piece-sorry it was such a tough birthing process. I used that Minwax English Chestnut to blend some Sapele with some Mahogany and it was beautiful. Sure looks good here.

-Alan

Re: A wine cabinet

#12

Re: A wine cabinet

Virgil Johnson

Very nice gift.

Re: A wine cabinet

#13

Thank you all for your comments.

Bruce, a MN Galoot

This was an interesting project for me, warts and all, because I learned a lot. While it's no one's idea of fun to deal with interlocking grain, it is something that comes up on occasion, and there's no better teacher than experience. I don't have a high angle smoother, but I learned that a truly sharp iron makes a world of difference.

In the course of the project, I asked several questions on this forum, and the advice I received was extremely useful. In particular it was really good to learn that the internal stresses due to improper drying weren't something I was doing, but that they would have to be accommodated.

It was also interesting that although there was a fair amount of variation in the color of the wood, once the stain was applied those colors really evened out. Although I vastly prefer Honduran mahogany, this African stuff really finishes nicely.

It's good to experience new challenges. Since I intended this piece of furniture to last a lifetime, I really did strive to make all joinery as precise as I knew how. All of those efforts are intrinsically worthwhile, even though I'm likely to be the only one who knows about them. I know my kids like it, and maybe that's all that really counts.

Thanks again to all of you for your kind words, and especially to Bill H, Ellis and Bill T, all of whom provided useful and timely advice.

Re: A wine cabinet

#14

Re: A wine cabinet

AZ in Colorado Springs

That's a really nice cabinet!

Re: A wine cabinet

#15

Re: Wow!

Bruce, a MN Galoot

I had not heard that tip before, but I will surely try it the next time I'm afflicted with interlocking grain. Thanks!