Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

OT Painting question.

Posts

OT Painting question.

#1

OT Painting question.

Barry Irby

I have posted many times about the adventures we are having buying a house in foreclosure and fixing it up for my son and DIL to live in. My question is about the interior painting.

The house is about thirty years old and had been used as a rental and was in pretty rough shape. The interior trim was stained pine and we painted over it. We print everything with 123 or Oil Based Kilz. The problem is the paint is not sticking to the trim as well as I thought it should. In cleaning excess paint out of the hinge mortises, the paint pops off around them. Really takes very little to chip the paint. We used white Valspar semi gloss for trim paint.

(The house was squalid when we got it and had been abused. Tenants had partially painted some rooms and painted over wall paper and torn some down and painted the glue. This one was in the worst condition of any house I ever tried to paint.) Hopefully we will be doing others, but I hope we never have to start this far behind the curve again.

So, did we miss a step? What else should we have done in preparation? Is this just the way it is or should we have washed it all or sanded it, or what?

Re: OT Painting question.

#2

Re: OT Painting question.

John Veerkamp

Not knowing what was used to finish the woodwork before, I'd venture that you should have washed the old surface with TSP and possible then used some liquid sandpaper to get the new paint to adhere. Old finishes can be tricky to prep.

My 2 cents,

John

Re: OT Painting question.

#3

Re: OT Painting question.

Barry Irby

The old trim has turned out to be a surprise. It was stained "walnut" brown and it appears some of it had some sort of thin coating, perhaps sanding sealer, but I suspect some of it had only stain. another aspect that I did not think through was that may of the nail holes were either never filled or the filler fell out along the way. And because it was stained, the trim was never caulked, so we had to caulk everything. Somehow, I expected to just prime and paint and clearly I didn't understand what I was getting into.

Thanks for the help. I need to check out liquid sand paper. Is this something you paint on and leave or something you scrub with? I have heard of it, but know nothing about it.

Re: OT Painting question.

#4

liquid sandpaper sites *LINK*

del schisler

here is a google search lot's to read about it. good luck


http://www.google.com/search?hl=en&source=hp&q=+li

Re: OT Painting question.

#5

Jason Roehl in Lafayette, IN

Re: OT Painting question.

Jason Roehl in Lafayette, IN

He's talking about a rose by another name: deglosser.

Personally, I scuff sand in a case like that instead of using deglosser. 120-150 grit or so should give any primer a good mechanical bond surface.

Also, don't be too discourage that paint chips soon after painting. Paint can take up to a month to cure to the point where it can take some abuse. I try not to get any excess paint in hinge mortises for the simple reason that it takes too long to clean it out. Live and learn (sounds like you're earning your doctorate on this house...)

Jason

Re: OT Painting question.

#6

Thanks, you are right....

Barry Irby

This house has been an education, most of it negative.

Some of it has been so stupid as to be unbelievable. It started with the floor plan. This house has about 1600 SF, 3 bedrooms and two baths. It has two fireplaces, one in the Master Bedroom. It had a "bump out" on the end that is 6 by 10 and the builder had made it a bar, complete with a sink, bar, and wine rake, but no master bath and no direct access from any bedroom to a bathroom. (Would have much rather have had a master bath than a bar and second fireplace.) It would take me a week to list all the little weird things. We eliminated a door upstairs and I thought I would move the door down stairs to replace a damaged one. Nope, They cut the hinges in different positions. Light switches are on the wrong side of doors. I decided to replace the drain in the second floor tub. The drain line sprang downward with such force it knocked a hole in the ceiling. Some sort of animal chewed the sheath off some of the Romex. The heat pump was ancient and we replaced it, but found that the first floor return had not been connected since it had been installed. Some of the ducts were rusted through and we replaced them. Any relationship the first floor toilet had to the pipe under it was a coincidence. We replaced four joists.

This has truly been a test. I have gotten to apply almost everything I knew about houses and have learned a lot.

Re: OT Painting question.

#7

Re: Thanks, you are right....

Joseph Mulherin, Sr

Barry, since you are a "Home Inspector" why did you NOT do a report on the house BEFORE purchasing it for you son and DIL???? time and unneccasry work All of this messy work could have been found oput that way I believe. I know, because I had a license doing Home Inspection work myself back in the 90s. I gave it up after about a year though because people wanted the reports but did not want to pay for them.

Re: OT Painting question.

#8

Re: Thanks, you are right....

Barry Irby

I bought this house at foreclosure. Literally placed a bid on the Court House Steps. In this situation they (the lenders) do not give access to the property before the sale. My son was stunned I was willing to buy it "site Unseen" and pay $60K. I had looked at the exterior and stared in through the windows and I knew it was rough, but did not anticipate some of the stupid things like the dumb floor plan. (When did it EVER make sense to put in a second masonry fireplace in the master bedroom and a bar, but no master bath?) I counted on the builder having had good sense, but was wrong. In the mean time, I have spotted about four other houses in the neighborhood that appear to be clones, with slight variations. I suspect he was shooting for variety and I got the dumb one.

This is one of the reasons houses sell cheap at foreclosure. The banks make little effort at marketing and are not even cooperative.

When I first started doing inspections, I prepared the reports on the computer in my office. I would mail the report along with the bill. In the first $6000 worth of inspections I did, I got paid for half of them. It became, do and inspection, work on collections, do and inspection, work on collections. I made the decision to collect at the end of the inspection, on site. No point and working and not getting paid. Its cheaper and easier to sit at home.

Re: OT Painting question.

#9

Re: Thanks, you are right....

FredD

Barry , next time you get the itch to buy a pig in a polk, check out your local banks and look at their REO list ,

Many will welcome a buyer that can assume a defaulted loan and many will issue a remodeling loan.

When things were slow in the sixties in Eureka a pardner and me bought homes from Six Rivers Savings and Loan , no money from us , they funded the remodel and gave us ninety days to turn it over.

If we didn't sell it , the loan would be converted into a standard 30 year instrument, but we always got the job done and sold before the deadline.

I believe we turned about eight houses that way and then construction climate warmed up and we back to swinging hammers.

Keep in mind that Bankers hate to have a inventory of foreclosed homes and most are open to a deal that will get their inventory reduced and the house back into good condition and naturally you get to inspect it to your hearts content prior to closing.

FredD