Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Don't laugh....rifle rest

Posts

Don't laugh....rifle rest

#1

Don't laugh....rifle rest

Terry Alexander

I live in West Texas and in case you haven't heard....the hog problem here is very real.

I have a huge back porch that is supported by 4 - 4x4 redwood posts. My back porch looks out over 80 of the 180 acres that I own.

This last Sunday, December 26 at 5:25 p.m.....I looked out at a "sea of moving black" in my back pasture. We had a herd of 70-80 hogs. We have owned this property for over 10 years and have lived out here full time now for 2 1/2 and I have never seen anything like this.

I am an excellent shot, but I need something to "hang" onto the 4x4 posts to rest my rifle. I don't want to drill any permanent holes into the 4x4's and it needs to be able to be moved up or down...very quickly. I am 5' 7" but my "fence guy" is 6' 4".

Am really hoping that you guys can give me some ideas here.

If I have offended anybody because I am shooting hogs, I apologize. But if you could see the damage that they are causing. Once they finish rooting up a pasture, you can hardly drive a tractor across it....much less a vehicle.

As always...Thanks in advance!

Terry Alexander in West Texas

Re: Don't laugh....rifle rest

#2

Re: Don't laugh....rifle rest

Bill Turpin in WNC mountains

What about a rectangular box with a open 4" slot on one of the long sides. The box needs to be about 8" long. The 8" is a guess, test with a quick sample. There is a side arm out from one of the short sides to support the gun. It should be padded. Line the box with very coarse sandpaper. Use: quickly place the 4" slot over the post from the away side, allow the box to tilt jamming it to the post, place gun on sidearm and shoot the prey. If this does not make sense, I will attempt to draw a pic later. Make it as tight as possible to actual post size and do a little experimentation to get the best locking motion. Angle the sidearm so that it is level when locked in slanted position.

Re: Don't laugh....rifle rest

#3

alternatives

Bill Tindall

I think you are thinking more complicated than is needed.

When I shot on the rifle team my sitting scores were nearly equivalent to my prone scores, which I suspect means that a "good shot" can shoot about as well sitting as any configuration. I was never good at the standing position, but when squirrel hunting I am deadly if I can wrap my fingers around a tree ( or 4 x 4 ) and rest the rifle in the vee between thumb and fist finger. If I can reliably hit a squirrel head at 100' in this position you should be able to hit a pig out to 2-300 yards.

Alternatively, if you can get some elevation it will be useful. If the house is 2 story throw a pillow rest in the frame of an upstairs window and kneel. I never miss a ground hog at 200' from such a rest. Got 13 with 200-250' shots last year.

What are you shooting at them with? Personally I would use traps for they work 24/7.

Re: Don't laugh....rifle rest

#4

Re: Don't laugh....rifle rest

Bill Turpin in WNC mountains

Here is a poor drawing but it gets the idea accross.

Re: Don't laugh....rifle rest

#5

Re: alternatives

FredD

If you haven't a sling on your rifle , get one and practice a little off hand standing position.

FredD

Re: Don't laugh....rifle rest

#6

Agree...

John in NM

Too complicated. You can use an upright post as a rest, or you can use a pair of sticks as an adjustable bipod. Both holds require some modification of your usual practice, but they're good techniques to know. Also try the sitting position Bill mentioned, and practice offhand as well. Accuracy becomes more difficult when not at a bench with paper at a known distance, but therein lies the challenge.

Re: Don't laugh....rifle rest

#7

JL

Shooting stick

JL

Cabela's has many types. Other than that, the sling works well.

Re: Don't laugh....rifle rest

#8

Re: Don't laugh....rifle rest

John E in SC

I mostly agree with what the others have said in that you probably don't REALLY need what you're asking about, and a trap would be your best alternative if you're really wanting to thin the herd. I guy I know made a homemade trap and caught 30+ in a short time on his place. Google "wild hog trap" and you will find plenty of ideas. Having said that, I can easily invision a sliding jig that would lock on the posts and give you a rest to shoot from. I don't have anyway here to draw it, and it's difficult to describe, but think of basically a hockey stick with an elongated "blade". Drill a hole and insert a large dowel (possibly covered with sandpaper if needed) at the "heel" and "toe" of the blade. The dowels slip on either side of the post, and when there is downward pressure on the "handle" of the hockey stick, it locks in place. The handle of course is your rest. Would be a fairly simple contraption to make. If it slips easily backwards, a bungee on the other side of the post to connect the ends of the dowels would help and be easy to move / adjust.

Re: Don't laugh....rifle rest

#9

Bessey K-Body

Dave Bair, Eaton Rapids, MI

Re: Don't laugh....rifle rest

#10

Ding, ding ding! We may have a winner!

John E in SC

Re: Don't laugh....rifle rest

#11

Actually

Mark Mandell - Gone Round In Jersey

Any 24" clamp would do. Add a piece of pipe insulation for a cushion - good to go.

Re: Don't laugh....rifle rest

#12

You just need one of these....  *LINK*

Phil Joines


pig gun

Re: Don't laugh....rifle rest

#13

Re: Don't laugh....rifle rest

Bill Tindall

I hunt a lot, anything edible or anything destroying farm or farm goods. Yours is not a complicated hunting situation. You need an adequate rest and it needs to be convenient and ready for use in a moment.

If the porch has a rail I would put a pillow on it next to post. Kneel ,or sit depending on rail height, and brace shoulder/arm against the post. In this position I would be almost equivalent to a bench rest, which of course is another option if you want to set up one on the porch. Nearly as good for a quick shot would be to wrap fingers around post and cradle rifle between thumb and first finger. As Fred said a sling is helpful.

If you have the rifle and scope for the job you should be able to reliably kill pigs out to 600' with ease, and farther still with some practice, with any of the options I suggested. If you aren't an experienced shooter put some targets up at the various ranges you expect pigs and become familiar with scope settings for each range. When a pig shows up at target XX dial in the scope for that range and blaze away. Wish I could be there to help. Sounds like great fun and depending on what they are eating pigs can be very tasty.....or foul. If they smell good they will taste good.

Again, what do you have for a scope and rifle and how far will your typical shot be?

Re: Don't laugh....rifle rest

#14

How about one of these

Lee Schierer McKean, PA

A quick grip clamp on the post will give you adequate rest at any height and post you desire to use. Best of all you can use it for your woodworking when the hogs are gone.



Lee

Re: Don't laugh....rifle rest

#15

To all responders...

Terry Alexander

Great points by all.

My "typical" shot is 450 yds.

I have 2 main hunting rifles.

1 is a 1980 Ruger M77 30.06 with a Douglas barrel. Dead on.

My 2nd is my retirement/lay-off present to myself.

A new Ruger M77 in the .220 swift cartridge. Yep...small cartridge, but a shot behind the ear is deadly.

I am very accurate sitting....thumb and forefinger.....I do use a sling.....all good points and I have utilized them all.

Other than building a shooting bench (which I do not want to put on my beautiful back porch...and SWMBO wouldn't let me anyway), I was looking for a quick "more solid" solution than I currently employ. Can't have much "wiggle" when taking a 450 yd. shot!

And yes......it's a ton of fun!

Terry Alexander in West Texas

Re: Don't laugh....rifle rest

#16

Re: Don't laugh....rifle rest

Leon

This may work, just get it sized for a 4x4.

http://www.bentmetalforge.com/catalogue-hooks-tentpolehook.html

Re: Don't laugh....rifle rest

#17

Thanks-I think you nailed what I was looking for

Terry Alexander

Re: Don't laugh....rifle rest

#18

Re: Thanks-I think you nailed what I was looking f

Keith Newton----Little Rock, Arkansas

Terry, My nephew has a six year old son, that wanted to shoot my crossbow. It was too heavy for him to aim, so I cut a forked limb, to make a bi-pod shooting stick. I then made a little cradle for the top, although it could have just been a U bandsawn into the top. His first five shots were all within about 5" of the center at 30 yds.

It was quick and simple to make. The two legs take care of side to side, and leaning fore and aft, takes care of elevation.

Ought to be easy to hide somewhere back there from the wife.

Re: Don't laugh....rifle rest

#19

How are wild hogs to eat?

wilbur

Re: Don't laugh....rifle rest

#20

Re: How are wild hogs to eat?

Terry Alexander

They are very good and very good for you. Very little fat. You will not get any bacon off of them.....because they have almost zero fat. When the processor makes sausage, he has to put in other fat because they are so lean. Even at that...when you cook the sausage you must put oil in the pan because there isn't enough fat to keep it from sticking.

However...the processors want $80 to process the hog and that is up from $40 from just 2 years ago. So, we "thin out the herd" and feed the other predators.

T

Re: Don't laugh....rifle rest

#21

Terry, you should get a grinder.

Keith Newton----Little Rock, Arkansas

My nephew and I bought one, and have been butchering our own game. After buying a pretty good stand alone one, I found the attachment for a Kitchen-aid mixer, at about 1/3 the cost. It would probably be an even better tool, if your wife already has the mixer, with the power takeoff on front.

The butcher shops around here will give us all the fat we need for free, when we start grinding. I made a summer sausage stuffer out of 4" pvc, with a wooden plunger for a couple of bucks. Should have used 3", but I didn't know what to expect in the beginning. Our venison summer sausage is great, and not too hard to make, with all the right stuff.

A sow can start reproducing at 7 ~ 8 months, with three litters a year, according to one site I found. It claimed that she and her offspring could lead to a potential 1000 over a five year period. I have not checked the math on that yet, so I don't know if it is true or not.

Re: Don't laugh....rifle rest

#22

no need to grind?

Bill Tindall

Unless TX pigs are different than GA pigs (possible as I don't know hardly anything about these critters)there are parts that can be roasted. I have been given pieces of shoulder and ham that when slow roasted were juicy and yummy. I doubt that there is any animal whose loin isn't tender. I was told that some GA critters are rank and inedible. Again , no first hand knowledge.

BTW, if you can hit one at 450 yards standing and leaning against anything fastened to a porch post you are a far better shot than I. There is no issue in my family about whether I keep some sand bags on the porch to be employed on the picnic table for long woodchuck shots. It's part of living on a farm.

Re: Don't laugh....rifle rest

#23

Re: Don't laugh....rifle rest

Steve Kreitler

What part of West Texas are you in? I'd be happy to come out and help you shoot a few pigs if you are near Abilene (actually, I'm sure you'd have no shortage of volunteers).