Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Molding profile . . .

Posts

Molding profile . . .

#1

Molding profile . . .

steve mackay

Just prime & paint left and its time for chair rail in the dining room. Before I make an idiot of myself trying to ask / describe what I'm after . . . does this type of profile have a specific name ?


I want to say "bull nose" but thats where my idiot side might show through.

Re: Molding profile . . .

#2

Re: Molding profile . . .

Barry Irby

Steve, locally I have not seen the profile you are showing. What we see is part of a two piece chair rail. The back band is about 3 1/2" wide with a bead on each edge. The piece you show is centered on it, but the two sides are covered with a 1/8" flat or step in between the bull nose and the cove. If I could post a drawing I could draw it faster than I could describe it.

Re: Molding profile . . .

#3

So . .

Mark Mandell - Gone Round In Jersey

Shut up and DRAW! :D :D :D

ps: Chair rail I've seen 'round here is often in 2 parts. Easier to do more complex profiles that way. 1-piece stuff most often looks like "colonial" casing.

Re: Molding profile . . .

#4

Thank you ! . . .

steve mackay

That, I suppose, was my question. Am I going hunting for something that doesn't exsist and am going to need to put together from "stock" profiles. Sometimes I'll be the guy who tries to argue with the dealer about what I'm after and he doesn't have. Now I'll go in more flexable.

Re: Molding profile . . .

#5

Re: Molding profile . . .

FredD

This a type of "Cloverleaf" Moulding often seen on Handrail and it would work just fine as a Chair Rail, so if you like the profile I say use it.

FredD

Re: Molding profile . . .

#6

Ah-ha !

steve mackay