Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

How to cut Shellac

Posts

How to cut Shellac

#1

How to cut Shellac

Bob S

I am using Bullseye clear shellac as a sealer between water based dye and water based poly topcoat.

However, the shellac I have is very thick, maybe 2 or 3# cut right out of can. Can I simply dilute it with denatured alcohol???

Re: How to cut Shellac

#2

yes

Dan Donaldson

Just dilute it to where it suits.

Re: How to cut Shellac

#3

Re: How to cut Shellac

paul in AZ

I do.

Just be aware that the "lbs" rating is the weight of dry shellac flakes in a volume of alcohol and not a volume/volume ratio. So as logical as it would seem, diluting a 3lb cut 1:1 does not give you 1.5lb shellac. All of this is pretty academic unless you want to know the exact cut you are using. I just slurp in the alcohol in non-measured ratios of around 1 part alcohol into 3 or 4 parts shellac, depending on how heavy the original cut is. If too thick, add a bit more.

there is an article in FWW's site under materials/finishes that discusses this if you really need to know the details.

Re: How to cut Shellac

#4

Re: How to cut Shellac

Howard Acheson

>>>> between water based dye and water based poly topcoat.

Be aware that waterborne poly finish shouldn't be used over a shellac that contains it's natural way. You should use a dewaxed shellac. The only pre-mixed dewaxed shellac is Zinsser's Seal Coat. Their standard Bulls Eye is not dewaxed.

Re: How to cut Shellac

#5

Dittox2

Mark Mandell - Gone Round In Jersey

You should not apply Bullseye if you are using waterborne dyes or finishes. The wax content will cause both blotching of the dye through uneven absorption as well as adhesion problems with the finish resulting in flaking and shedding of the finish.

If you're thinking to use the shellac as a sealer, either mix your own from dry flakes (best) or try to get some premixed product 9SealCoat or Homestead liquid shellac) that is as fresh as possible.

You're correct to seal the water-dye under solvent finish to prevent bleed of the dye into the waterborne top coat. Be careful, however, with how much shellac (dewaxed) you use because the waterborne finishes have a tendency to cold check (induce cracks as in antique items) in the shellac. It's a real pain to have to strip and refinish things when that happens [DAMHIKT]. Keep your shellac layer thin and use fresh shellac. Over time, I've gotten fairly good at mixing about what I need to do a piece so I don't have mixed shellac siting for more than a few months. SealCoat used to put a "born-on" date on their cans, but it seems they've stopped. Last can I got was obviously old because it did not harden up well. I'll rinse it off and redo the piece with my own mix come Spring.

Re: How to cut Shellac

#6

Re: Dittox2

Bob S

Boy am I glad I posted my question.

Last time I used dye/ shellac/poly I followed directions given to me on this boss by a "M. Dresdner". I was very glad to get that advice and my table has held up well...

This time I got lazy and was going to use Bullseye. The flakes/solvent are difficult to find and costly for me. But now with this latest expertise I will search for and make my own shellac. Last time I had to buy a 1 pound container of flakes. It will last a lifetime, I used about1/10 th of it!!!

My last question is this: will the flakes last forever on my shelf? So I don't mind buying another $30 container ( I used garnet last time, want clear now).

Thanks for all the great input.

Re: How to cut Shellac

#7

video on shellac (bob neil) *LINK*

del schisler

check this video on shellac mixing and use. enjoy


http://www.youtube.com/profile?user=InTheWorkshop#

Re: How to cut Shellac

#8

Getting Flakey *LINK*

Mark Mandell - Gone Round In Jersey

Hi Bob,

Some suppliers will sell shellac flakes in less than 1 lb quantities, but I buy it by the pound from Jeff Jewitt at Homestead Finishing. I know Jeff's stock is top of the line in quality, and I've stored his dry flakes for over 3 years (air-tight jar in a dark cabinet) with no loss.

BTW, if you want the lightest shellac available, get Jeff's Ultra Pale product. [link] It's as close to water white as I've ever seen. Mix your shellac in smaller quantities; I never need more than 12 oz. of mix for a given project, usually much less. If I don't use a mix within 3 months, I'll run it through a coffee filter to remove any impurities and then check it with a quarter-sized puddle. If its not fingernail hard the next morning, it gets pitched.


Homestead