Some more first hand experience
Bill Tindall
I am no longer on vacation and hence have access to a computer with a real keyboard, and I can see what I am typing, so I can elaborate more on beech.
It is a fact that there is essentially no market for beech. The species is never quoted in the Hardwood Market Reporter for KD wood. There are quotes for green lumber, where a 1C grade is essentially the same price as FAS ( for an in-demand furniture wood the differential would be 2X or more). All these data point to the fact it is not used in furniture in the US. What commercial use it has is for small items like paint brush handles and rail ties. I rarely see it on a log yard which is leading to the fact Fred pointed out. It doesn't get cut, so over time its fraction of what is left is increasing. It tolerates heavy shade, so it lays in waiting for the valuable trees to be cut and then it flourishes, shading out everything under it dense canopy, particularly maple and especially birch which requires bare soil to seed. I regard it as a forest weed and kill it(which is near impossible) when improving a timber plot. I have cut hundreds of these weeds in the past year. So, given that it is plentiful and becoming more so, why is it eschewed by the market (Fact, if you aren't buying truck loads you aren't the "market" and hence you don't determine what gets logged and sawed in "market" quantity).
1. The difference between radial and tangential shrinkage in beech is more than 2X, and less than 0.5X for typical furniture hardwoods. While you may be able to accommodate the relatively large absolute and relative dimensional response to humidity changes in the design of your furniture, or humidity control in modern homes, it is a bitch to dry and keep flat and a challenge to a factory shipping furniture to Alabama and Arizona. The European mills mitigate this problem by steaming the wood which lessens the drying issue. In much of Europe beech is all they got so they are motivated to deal with it. With most of the world's hardwood lumber resources here in the Eastern US, we have choices, much better choices.
2. US beech does not make good logs. I helped log a boundary of timber in the 70's that had, for here, seemingly outstanding beech trees. They were large, tall and well limbed out. Never-the-less, they sawed out very little high grade lumber. Larger trees are often hollow, the limbs survive in the shade so the trees don't limb out till late in life and even "clear" lumber is often gnarly.
3. Beech is plain as dirt and there is little demand for plain as dirt furniture in this country's furniture and cabinetry buyers. As nice as ash is there is little demand for it either (in the '60's and 70's when light furniture was fashionable, it was the same price as cherry). Occasionally maple has a run as a light colored wood but mostly it is out of fashion too.
There may be yet other reasons for the lack of a US beech market.