Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Stacked dado excercise - long

Posts

Stacked dado excercise - long

#1

Stacked dado excercise - long

Ray - Middletown, IN

My friend/student came with this design and wanted exposed joints so I thought it would be a good time to introduce him to stacked dadoes on the table saw. The bench is about 48" long, 19" tall and 17 and change wide.


All of the maple slats are 3/4" with 3/4" spacing, set into mahogany legs. The legs are a mix of very old mahogany and some new very smelly stuff, colored to match, sorta.


All of the slats have dowels in the lower step for strength. It passed the 600lb. test so I think it will be ok for a coffee table. We bought cheap maple so they weren't all white, shoulda spent more money here.


A closeup of the corner.


View of the tiger maple we found for the sides. We used dye to help bring out the stripe.


Don't pay any attention to the background clutter, it's always that way.

Ray

Re: Stacked dado excercise - long

#2

Clint Searl

Finally....

Clint Searl

A workbench that looks like work is done on it. :D

Clint

Re: Stacked dado excercise - long

#3

Moses Yoder

Re: Question

Moses Yoder

How is the top attachedd to the leg assemblies? It looks like it might just be glued together. Pretty neat design; I like it. It has some challenges, like the angled leg assemblies.

Re: Stacked dado excercise - long

#4

Dowels and Glue

Ray - Middletown, IN

He was pretty set on the design but I did talk him into adding dowels for some additional support. Here is a crude pic, each slat has a dowel into the leg assemblies.


It made for a nightmare of a glue up though.

Ray

Re: Stacked dado excercise - long

#5

That's a temporary bench

Ray - Middletown, IN

dad and I put together some 35 years or so ago for a project and It's been in use ever since. Just a solid core door and some 4x4's.

Ray

Re: Stacked dado excercise - long

#6

Fabulous Work!

Howard In Toronto

It's obvious your buddy has a great eye - his take-off of this classic 1946 George Miller bench is sensational.

If you consider the starting point - http://www.hermanmiller.com/Products/Nelson-Platform-Bench - and your buddy's solid glued-up seat vs the original's lattice and his not ebonizing the legs, he's onto a nicely personal interpretation.

I've got a question though - how much does the leg structure rack?

Thanks for sharing the photos.

Howard

Re: Stacked dado excercise - long

#7

Whoops - It's George Nelson

Howard In Toronto

It's sold by Herman Miller.....