Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

DeWalt 12 Volt Max Drills/Drivers ? ? ?

Posts

DeWalt 12 Volt Max Drills/Drivers ? ? ?

#1

DeWalt 12 Volt Max Drills/Drivers ? ? ?

Barry

Does anyone have any experience with this new compact line of tools from DeWalt? I like the looks of them and they feel good in the hand, but I can't seem to find complete specifications on them. What I am interested in is the torque in inch/pounds and run time on the battery. They have lithium-ion batteries and they look tiny. I just wondered about the run time. Thanks.

Re: DeWalt 12 Volt Max Drills/Drivers ? ? ?

#2

Re: Not Dewalt, but

Bob Entwisle in NJ

I've no experience with the Dawalt, but I've been using a set of the mini? Makita 10.?V Lithium ion batteried Drill/Driver and Impact driver at work over the past year or so and I'm impressed with the power and charge life on the batteries. Now I'm not doing WW at work, but lots of assembly and dis-assembly of electronics and building fixtures and the like, I guess a little WW at work when I can sneak it in:).

I've got my eye on the 12V PC Li drill set. I would imagine that the Dewalt tool is similar in capabilities and battery life/power etc. This new generation of smaller lighter drills seem to be just as capable as my old heaveyweight 14.4V Dewalt, but lighter and easier to handle.

Re: DeWalt 12 Volt Max Drills/Drivers ? ? ?

#3

Re: Not Dewalt, but

Barry

Thanks. I have an old, (15+ years) Panasonic 9.6 volt cordless drill. It looks like a hair dryer, but it packs a punch. 9.6 volts seems to be quite sufficient for my needs. I have had both batteries rebuilt at Batteries Plus and finally replaced with new batteries, but the drill itself keeps on plugging along.

I am a woodturner and use the drill with a 2" soft velcro pad to sand bowls. I've been using it in this manner since 2002. I figured it would last maybe six (6) months because of the dust and I would have to replace it. Not so.

At some point, I am going to have to replace my drill. I just thought this new offering by DeWalt might be it. I consider what I do to be pretty tough duty for a cordless drill. so maybe I need to move a little further away from homeowner quality towards professional-duty. What do you think?

Re: DeWalt 12 Volt Max Drills/Drivers ? ? ?

#4

One indicator might be

Henry Higginbotham

where they're made. Unless things have changed recently and I didn't get the memo, DeWalt's better tools are made in Mexico, their lesser ones in Asia.

Re: DeWalt 12 Volt Max Drills/Drivers ? ? ?

#5

Jim DeLaney, Austintown, Ohio

Re: Not Dewalt, but

Jim DeLaney, Austintown, Ohio

I have the Bosch 10.8v drivers and drill, and have had pretty much the same experience. They're not as powerful as the bigger stuff, but the batteries last quite well, and the power is adequate for driving most of the screws I use (generally #8 and smaller).

Thay've become my "go to" drills/drivers instead of the bigger, bulkier 'full-sized' 14.4 DeWalts I've had for years.