Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Sometimes being framed can be a good thing

Posts

Sometimes being framed can be a good thing

#1

Sometimes being framed can be a good thing

Dave Paine

Some friends have a large old house. Rooms with 11ft+ high ceilings, lots of wooden molding reflecting the high end workmanship of the original owner, the town doctor.

The husband built a bathroom into what is now the main bedroom and installed some attractive stained glass windows. He normally would have framed in pine and painted white to match the foam crown molding, and chair rail which is about half way up the wall.

He showed the room to me and I had to recommend framing in wood to complement the windows and make them move of a showpiece.

I built the top three sides and trim in purpleheart tpo highlight the flame in the window and the lower ledge in bubinga to complement the colour of the wallpaper on the other walls of the room.

I was able to install the pieces this weekend. The wife was very happy and commented about how she enjoys waking up in the morning and seeing the windows. The bed faces this wall. The husband was out of town at the time. He has seen the pieces when I came over for the test fitting before applying the finish.

The wife was not able to visualize how this would look, but is happy she went along with my recommendations. This was the first time they ever saw these wood species.

Although no complex joints, this took me longer than expected. Par for the course for my projects. End results and response from the friends makes it worthwhile.


Re: Sometimes being framed can be a good thing

#2

Re: Sometimes being framed can be a good thing

Henry (Raleigh, NC)

Well done!

It's not too hard to understand that she had difficulty being able to envision this. I like it - but I suspect that if I saw it in an even larger context, I would even more appreciate the matching you did to other existing elements in the room.

Great when a vision comes reality and it works as well as you had hoped.

Henry

Re: Sometimes being framed can be a good thing

#3

Re: Sometimes being framed can be a good thing

Bartstar

I like the pairing of Purpleheart and Bubinga. Question, where did you end up having to spend additional time that was unexpected?

Bart

Re: Sometimes being framed can be a good thing

#4

Re: Sometimes being framed can be a good thing

Dave Paine

A combination of operator hiccups and the method of construction evolving. I am not proud of the hiccups and so would normally leave out such details, but since you asked.....

I had taken down the dimensions of the front 3 windows, and cut all the pieces of the frame and trim in the Purpleheart. I was then reminded about the 4th window. At the time I had run out of Purpleheart, and my local lumberyard was not restocking. The local Woodcraft was not due to get some in for several weeks.

So for the trim between frame and window I resawed the pieces on the bandsaw and then glued strips of baltic birch plywood to get the thinkness I desired.

As "Murphy" would have it, the first mitre cut of the frames I had flipped the wrong way and so made a bad cut. Insufficient material to make a new piece, I had to patch. The first attempt at gluing failed. Had to re-cut and re-glue.

I was originally going to screw the frame pieces to the trim and the trim to the 2x4 wall framing. I changed my mind to routing a lip on the trim and then cutting the frame pieces to be a snug fit around the trim pieces.

I also decided to glue the frame pieces together so would be faster to install. At the time I did not have a good method to clamp the pieces while gluing (superglue) and pining. This was a good move. It really saved a lot of time with the installation.

For the bubinga ledge I decided to dowel to make it easier to align the pieces. I had dowel jig for the horizontal piece, but then had to transfer the dowel locations to the vertical piece using the dowel pin markers. I only have two for each diameter and so marked then moved. Drilling the vertical piece was done on the drill press, so had to spend time to clamp, drill, clamp, etc. My drill press has 2ft wide table, but still had large overhang for each end.

So these were the kind of things which were not planned. Not unusual for me to run into a number of challenges, or impact of changing my mind on aspects of the design.

Re: Sometimes being framed can be a good thing

#5

Re: Sometimes being framed can be a good thing

Bartstar

Dave, I find that its these kind of details that are the things I learn from the most. By explaining your mistakes, I can potentially avoid doing the same on a similar project. Thanks for taking the time to share.

Best Regards

Bart

Re: Sometimes being framed can be a good thing

#6

Classy!

paul in AZ

Re: Sometimes being framed can be a good thing

#7

Really nice work, David!

Stuart Hough