Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Multimaster for grout - good or bad idea?

Posts

Multimaster for grout - good or bad idea?

#1

Multimaster for grout - good or bad idea?

Tim Greif - West of Chicago

LOML is interested in regrouting some of the bath areas, wall and floors. How well does the Multimaster type tool do at removing the old grout? I've never used one and I'm concerned that it may damage the tile. I've used an angle grinder very carefully to do this but it takes some concentration to avoid damaging tile. Plus it's adusty mess. Anybody have a better way?

Re: Multimaster for grout - good or bad idea?

#2

Re: Multimaster for grout - good or bad idea?

Stuart Johnson

I used the Dremel version when I redid the shower. It works very well and is fast. You do need to be very careful though because it will cut the tile just about as fast as the grout. The shape of the grout blade helps prevent accidents.

Re: Multimaster for grout - good or bad idea?

#3

Re: Multimaster for grout - good or bad idea?

Mark Nowicki

I tried using my Dremel version of that tool and it was useless. You would need the patience of Job and countless blades. A rotary type tool (RotoZip or Dremel) would be my choice.

I tried my battery powered Dremel which worked much faster than the multitool, but the battery capacity is too small for any serious work.

Mark

Re: Multimaster for grout - good or bad idea?

#4

Re: Multimaster for grout - good or bad idea?

Stuart Johnson

Mark, Interesting two of us have used the Dremel with different results. Did you use the actual grout blade? I had previously used a regular Dremel with the round grout bit and didn't care for it one bit. I don't have any experience the the Roto-Zip.

Re: Multimaster for grout - good or bad idea?

#5

Re: Multimaster for grout - good or bad idea?

Mark Nowicki

Yes, I did.

I was changing a bathroom window, and had to remove about 30" of grout. I got about 4" done in 15 minutes. The best tool for that job turned out to be a hook knife with a carbide tip.

Both my Dremels fall into "tools I regret buying" category.

Regards

Mark

Re: Multimaster for grout - good or bad idea?

#6

Re: Multimaster for grout - good or bad idea?

Stuart Johnson

Are you talking about a silicone type grout or the type between tiles? I can sure see how a window or tub type grout would be a problem.

Re: Multimaster for grout - good or bad idea?

#7

Re: Multimaster for grout - good or bad idea?

Mark Nowicki

The between tiles type.

I don't know what "silicone type grout" is.

Mark

Re: Multimaster for grout - good or bad idea?

#8

Re: Multimaster for grout - good or bad idea?

Stuart Johnson

Me neither.... Sorry, when you said around a window I was thinking caulk rather than grout.

Re: Multimaster for grout - good or bad idea?

#9

Re: Multimaster for grout - good or bad idea?

matt overton

The Multimaster does work well for grout removal. It is still time consuming, but works as intended with minimal damage.