Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Aniline Dye Stain Finish

Posts

Aniline Dye Stain Finish

#1

Aniline Dye Stain Finish

Bob S

I plan to use an Aniline Dye stain to color a coffee table I made of oak. We want a whitish/gray tone to it. I have used AD stain before, water soluble, with Shellac sealer, then Water based poly. This came out very nice. However, the shellac i used was Garnet, and as desired, imparted an amber tone to the finish.

This time, I want NO COLOR from the shellac, just simply a sealer coat. Do I need to buy another $20 tub of shellac flakes and mix my own (maybe blonde?) or is there something available already mixed that would be clear and serve my purpose well?

Thanks, and any other suggested finishes are welcome. Just trying to turn White Oak to look Gray (driftwood like color).

Re: Aniline Dye Stain Finish

#2

Clint Searl

Re: Aniline Dye Stain Finish

Clint Searl

Test the waterborne poly directly over the dye stain. If it doesn't pull the stain too much that may be the way to go. If it does pull and smear the stain, a light barrier coat of spraycan clear solvent lacquer will hold back the stain.

Clint

Re: Aniline Dye Stain Finish

#3

Re: Aniline Dye Stain Finish

sroxberg

I am finishing some Curly Maple and have the same goal, a coat of shellac that does not add any color or as little as possible.

I bought Ultra Pale shellac from Homestead Finishing and it is really clear. The super blonde that I got from rockler is pretty darn clear, but you still see the yellow tint.

If you can spary the top coat you may be fine without any shellac.

Re: Aniline Dye Stain Finish

#4

Re: Aniline Dye Stain Finish

Mark Mandell - Gone Round In Jersey

Bob,

Jeff Jewitt sell a premium grade "Ultra Pale" shellac that is very close to water-white.

Zinsser's SealCoat is a very pale dewaxed shellac, but I'm noting that several cans I've gotten locally appear to be long in the tooth on the shelf-life issue as the coating did not dry up as hard as I wished. This becomes important when you're using waterborne top coats as the waterborne finishes tend to have cold checking problems when applied over shellac that's too old (read more than 6 months mixed). SealCoat used to put "born-on" dates on the cans, but stopped.

Waterbornes will bleed AD's, and it's specially noticeable on light woods. I would not bother trying. Your finishing routine is correct, so stick to it.

Re: Aniline Dye Stain Finish

#5

Re: Aniline Dye Stain Finish

Jesse Cloud

+1 on Zinsser seal coat, spray or can. Buy it at the busiest Home Depot in your area to have a better chance of a fresh can. BTW Zinsser has a proprietary formulation that they claim gives 2 year shelf life - but I'm skeptical...

Re: Aniline Dye Stain Finish

#6

Re: Aniline Dye Stain Finish

Bob S

Raised Grain or not? So, i am almost ready to go. I got my AD stain and the color is ideal. My question now, is preparation. My table is white oak, and i have sanded, 60, 100, 150. I feel no further is necessary, but maybe I am wrong?

Also, will the water based dye, raise the grain on white oak, it doesn't appear to have on the sample piece i did, but always like to ask the experts here!!!!

-Snowy In Boston

Re: Aniline Dye Stain Finish

#7

Re: Aniline Dye Stain Finish

George Colonel's Workshop-Havertown PA

Good Evening Bob,

Anytime I use aniline dye, I always raise the grain with water first. It may be true that your sample may not have shown pronounced grain raising, but the dye is water based. It will raise the grain, albeit, somewhat. Address that and then dye.

George

Re: Aniline Dye Stain Finish

#8

Clint Searl

Also

Clint Searl

150grit is a far as necessary. And after George's treatment and the stain is dry, give the piece a rubdown with a maroon scotchbrite before finishing.

Clint

Re: Aniline Dye Stain Finish

#9

Re: Aniline Dye Stain Finish

Bob S

George - You are absolutely correct. I washed that table down and the grain popped up on various pieces 'like you read about'. Glad you responded, this reinforces my understanding of this necessity.

Got my clear dewaxed , shellac and plan to 'finish' the table in the next week or so.

Bob